Anyone have a piece of 1/8” sheet metal laying around? Looking for something 6-8" wide by 20-24" long.
Altitude has almost nothing in their drop yard. Haven't made it to K&K yet. Figured I'd ask here.
Sent from my Pixel 5 using Tapatalk
www.ColoradoClassicBroncos.com
A place for Coloradans to unite with our love of 66-77 Ford Broncos
1/8" sheet metal
11 posts
• Page 1 of 1
1/8" sheet metal
by phyler » Fri Dec 17, 2021 8:20 pm
1975 Ranger Edition that I've had longer than I've been without it.
- phyler
- CCB Admin
- Posts: 1202
- Joined: Sat Oct 02, 2010 8:41 pm
- Location: Erie
1/8" sheet metal
by Eck » Fri Dec 17, 2021 11:16 pm
I’ll take a look in my pile this weekend and let ya know.
ACE and Home Depot sometimes has that small of a piece sometimes. Might check.
Sent from my iPhone using Tapatalk
ACE and Home Depot sometimes has that small of a piece sometimes. Might check.
Sent from my iPhone using Tapatalk
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
Eck - Official CCB Member
- Posts: 2460
- Joined: Thu Oct 25, 2012 8:33 pm
Re: 1/8" sheet metal
by phyler » Sat Dec 18, 2021 7:09 am
I looked at Home Depot and Lowes. They don't carry anything that thick in their sheet metal. I'll look at Ace. There's not one super close. Maybe tractor supply?
Sent from my Pixel 5 using Tapatalk
Sent from my Pixel 5 using Tapatalk
1975 Ranger Edition that I've had longer than I've been without it.
- phyler
- CCB Admin
- Posts: 1202
- Joined: Sat Oct 02, 2010 8:41 pm
- Location: Erie
Re: 1/8" sheet metal
by phyler » Sat Dec 18, 2021 7:28 am
I could probably use 14ga instead of 1/8. Trying to build a hanger for some tools so I don't think 16ga will be strong enough.
Sent from my Pixel 5 using Tapatalk
Sent from my Pixel 5 using Tapatalk
1975 Ranger Edition that I've had longer than I've been without it.
- phyler
- CCB Admin
- Posts: 1202
- Joined: Sat Oct 02, 2010 8:41 pm
- Location: Erie
Re: 1/8
by ZOSO » Sun Dec 19, 2021 9:08 am
I got ya. is rusty ok? rough cut? I can have it cut for ya wednesday or thursday.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
-
ZOSO - Moderator
- Posts: 3907
- Joined: Mon Nov 15, 2010 4:58 pm
- Location: Henderson, Co
Re: 1/8" sheet metal
by phyler » Sun Dec 19, 2021 9:49 am
Rough cut and rusty are fine so long as the rust isn't too serious. Thank you! Happy to meet you to pick it up.ZOSO wrote:I got ya. is rusty ok? rough cut? I can have it cut for ya wednesday or thursday.
Sent from my Pixel 5 using Tapatalk
1975 Ranger Edition that I've had longer than I've been without it.
- phyler
- CCB Admin
- Posts: 1202
- Joined: Sat Oct 02, 2010 8:41 pm
- Location: Erie
Re: 1/8" sheet metal
by Eck » Sun Dec 19, 2021 2:02 pm
Just checked. I’ve got 3/16 so twice as thick as you were looking for.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
Eck - Official CCB Member
- Posts: 2460
- Joined: Thu Oct 25, 2012 8:33 pm
Re: 1/8" sheet metal
by phyler » Sun Dec 19, 2021 2:15 pm
Thanks. I have a plate of 3/16 and it would work but drilling the holes I need to drill would take forever vs 1/8 or 14ga. Sounds like Rob has me taken care of. I might try on a piece of 16ga I have here.Eck wrote:Just checked. I’ve got 3/16 so twice as thick as you were looking for.
Sent from my iPhone using Tapatalk
Sent from my Pixel 5 using Tapatalk
1975 Ranger Edition that I've had longer than I've been without it.
- phyler
- CCB Admin
- Posts: 1202
- Joined: Sat Oct 02, 2010 8:41 pm
- Location: Erie
Re: 1/8
by ZOSO » Thu Dec 23, 2021 10:17 am
got ya cut n ready. shhot me a pm when you can meet up
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
-
ZOSO - Moderator
- Posts: 3907
- Joined: Mon Nov 15, 2010 4:58 pm
- Location: Henderson, Co
Re: 1/8" sheet metal
by phyler » Mon Jan 24, 2022 12:46 pm
Mostly finished. I needed a project and saw something similar online and thought, that would be fun to make. Needs some paint and to be mounted to the wall. I think I'll have a couple of open spots once I put all the clamps in it. It holds 16 and I'll come close to filling it.
First pic is it laid out before I bent it up.
Finished pics with it mounted in the vice to show it off.
Sent from my Pixel 5 using Tapatalk
First pic is it laid out before I bent it up.
Finished pics with it mounted in the vice to show it off.
Sent from my Pixel 5 using Tapatalk
1975 Ranger Edition that I've had longer than I've been without it.
- phyler
- CCB Admin
- Posts: 1202
- Joined: Sat Oct 02, 2010 8:41 pm
- Location: Erie
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests