New EB owner in north denver wants to hire exp.EB mechanic

Its a tough world out there right now. Post up if you need a job, know of a job or if you have services to offer to make some extra coin.

New EB owner in north denver wants to hire exp.EB mechanic

Postby Postalpal » Tue Oct 24, 2017 5:43 pm

I have a 74"EB
Looking for a full cage roll bar, either someone that could build one or I could buy a kit
from TBP and would need it welded together I have several nice original body parts to trade or I have cash parts like
Doors- complete or shells
Hood
Fenders-Cut or uncut
Grill

I live in north Denver near 136th & Quebec, But could travel a little
I’m in no hurry but would like to get something in the works. If this is still posted I’m still in need
Message me 7204217027 Terry
Last edited by Postalpal on Sun Feb 10, 2019 8:30 pm, edited 1 time in total.
Postalpal
 
Posts: 7
Joined: Sun Oct 22, 2017 7:11 pm
Location: North Denver

Re: New EB owner in north denver wants to hire exp.EB mechan

Postby Jesus_man » Wed Oct 25, 2017 6:52 am

I am sure you can find some help, and I'd be willing to bet it's a simple fix. Perhaps the bearings are too tight?

If you jack up one tire does it roll freely? Can you tell if it's the brakes dragging or something else?
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
 
Posts: 5987
Joined: Thu Nov 11, 2010 9:36 am
Location: California

Re: New EB owner in north denver wants to hire exp.EB mechan

Postby landshark » Wed Oct 25, 2017 7:40 am

I would ping crawler creations here as he has a shop and is intimately familiar with Broncos.
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
User avatar
landshark
Official CCB Member
Official CCB Member
 
Posts: 3942
Joined: Thu Oct 13, 2011 11:16 pm
Location: Denver, Wash Park Area

Re: New EB owner in north denver wants to hire exp.EB mechan

Postby Eck » Wed Oct 25, 2017 8:46 am

I would give CrawlerCreations a message as well. He is up in north Arvada and runs a shop and does great work. Also-- if he is too busy and you are wanting to have your brakes looked at, I had taken my Bronco over to Brakes Plus on 5465 Wadsworth Bypass, Arvada, CO 80002. The service manager there has an early bronco and is very familiar with them.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: New EB owner in north denver wants to hire exp.EB mechan

Postby phyler » Wed Oct 25, 2017 10:27 am

Have you lifted the front end and tried to spin the rotor by hand with the tire off? Does it spin freely? If so, press the brake pedal and see if after you let off it the brakes hold. Could be that a pressure residual valve in the master cylinder is causing the issues.

Sent from my Pixel 2 using Tapatalk
1975 Ranger Edition that I've had longer than I've been without it.
phyler
CCB Admin
 
Posts: 1202
Joined: Sat Oct 02, 2010 8:41 pm
Location: Erie

Re: New EB owner in north denver wants to hire exp.EB mechan

Postby Postalpal » Wed Oct 25, 2017 7:11 pm

Thank you friends because of you i have a couple contacts Thaxs to all of you. Bear with me I'm still trying to figure out this apt. And how to contact people so if i left you a mess.or talked to you hit me up if you dont hear from me in a couple days
. I also wanna try and get ahold that C4 guru on here that everyone recommends

I'll be back to post some pics and feedback thank you
You do not have the required permissions to view the files attached to this post.
Postalpal
 
Posts: 7
Joined: Sun Oct 22, 2017 7:11 pm
Location: North Denver

Re: New EB owner in north denver wants to hire exp.EB mechan

Postby B.O.B. » Wed Oct 25, 2017 7:43 pm

I think I might have helped you to this sight from Facebook. Just ask as many ? You need and i am sur everything will Work out. The C4 guru is Viperwolf.
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
B.O.B.
Official CCB Member
Official CCB Member
 
Posts: 771
Joined: Thu Nov 11, 2010 9:31 am

Re: New EB owner in north denver wants to hire exp.EB mechan

Postby Jesus_man » Wed Oct 25, 2017 7:46 pm

Postalpal wrote: I also wanna try and get ahold that C4 guru on here that everyone recommends


That'd be viperwolf.

If you haven't noticed, we're a pretty hands-on group here. A "teach a man to fish" theme.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
 
Posts: 5987
Joined: Thu Nov 11, 2010 9:36 am
Location: California


Return to Employment Section

Who is online

Users browsing this forum: No registered users and 3 guests

cron