|
It is currently Fri Nov 22, 2024 6:07 pm
|
|
Page 1 of 1
|
[ 24 posts ] |
|
Author |
Message |
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
New to Colorado.
Just moved here from NC. I am a 31 year old former Ford Technician turned geophysicist. I have owned my Bronco for about 5 years now. I have been waiting for a garage to work on it and now I have it. It has been a daily driver until about a year ago when the transmission (T18) and transfer case (Dana 20) began leaking so bad I was refilling them once a week. I have already began removing them. They should be out tomorrow and then I rebuild them both. While it was sitting for about a year, cracks appeared on both quarter panels between the upper and lower (at the seam). I bought it from a guy who did the body work and I guess he used a lot of BONDO. Both door window frames just recently broke (near the windshield), so I have to re-weld those. My to do list is large, but my wallet is small. So for now, I will be fixing what needs to be fixed. A few things I want to do: 1) Coyote motor or 4bt (can't decide) 2) 5 inch lift and 38" tires 3) Cowl hood and repair the body 4) Better seats. I look forward to meeting fellow Bronco nuts. If you would like to see a closer look of the bronco you can see them here : http://s366.photobucket.com/user/JFulle ... t=3&page=1
You do not have the required permissions to view the files attached to this post.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Fri Jul 26, 2013 12:18 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: New to Colorado.
I forgot to add that I have not been able to come up with a name for my Bronco. Any suggestions?
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Fri Jul 26, 2013 12:20 pm |
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: New to Colorado.
Nice rig! No name suggestions, sorry.
|
Fri Jul 26, 2013 6:07 pm |
|
|
Kinder
Official CCB Member
Joined: Wed Sep 29, 2010 10:03 pm Posts: 4371 Images: 0 Location: Parker, CO
|
Re: New to Colorado.
Looks great, I saw your post on ACB so I know folks have pointed you in the right direction. If you'd like a hand with anything just ask, I'd love to help with the trans.
_________________ Best to Date MPG: 26.6
|
Fri Jul 26, 2013 6:15 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: New to Colorado.
Thanks Kinder and Justin.
Kinder, I noticed many people belong to both ACB and CCB. Feel free to drop by tomorrow after lunch anytime if you like. I am picking up a transmission jack in the morning to make things a little easier.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Fri Jul 26, 2013 8:28 pm |
|
|
Colorado75bronc
Official CCB Member
Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: New to Colorado.
That's awesome, look forward to seeing it in person, I have one suggestion, Mean Green :) otherwise I've got nothing
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
|
Fri Jul 26, 2013 8:30 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: New to Colorado.
I like Mean Green!! Best I have heard yet. PM me if you need my address and plan on dropping by.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Fri Jul 26, 2013 9:16 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: New to Colorado.
Just scored a parts washer and transmission jack for $100. Time to drop the tranny and transfer case
You do not have the required permissions to view the files attached to this post.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Sat Jul 27, 2013 12:23 pm |
|
|
B.O.B.
Official CCB Member
Joined: Thu Nov 11, 2010 10:31 am Posts: 770
|
Re: New to Colorado.
go with Kermit.....Mean I=green is so over used, ;-)
_________________ 71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
|
Sat Jul 27, 2013 8:12 pm |
|
|
Colorado75bronc
Official CCB Member
Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: New to Colorado.
We already have a Kermit, don Alison's hunting bronco is Kermit
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
|
Sat Jul 27, 2013 10:03 pm |
|
|
Kinder
Official CCB Member
Joined: Wed Sep 29, 2010 10:03 pm Posts: 4371 Images: 0 Location: Parker, CO
|
Re: New to Colorado.
Nice score
_________________ Best to Date MPG: 26.6
|
Sat Jul 27, 2013 10:42 pm |
|
|
B.O.B.
Official CCB Member
Joined: Thu Nov 11, 2010 10:31 am Posts: 770
|
Re: New to Colorado.
well if Kermit is taken, you can call it slimmer until all the leaks are fixed
_________________ 71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
|
Sun Jul 28, 2013 6:12 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: New to Colorado.
Nice ride!! Welcome to the club. You are in the right place.
What brought you to CO?
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Sun Jul 28, 2013 9:02 am |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: New to Colorado.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Sun Jul 28, 2013 9:55 am |
|
|
Colorado75bronc
Official CCB Member
Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: New to Colorado.
I live in colorado springs, but I hope to see you at one of the events
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
|
Wed Jul 31, 2013 10:29 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: New to Colorado.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Thu Aug 01, 2013 6:51 am |
|
|
Colorado75bronc
Official CCB Member
Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: New to Colorado.
I'm planning on going to the meet this month, hope to see ya there
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
|
Thu Aug 01, 2013 11:04 am |
|
|
casadejohnson
Official CCB Member
Joined: Tue Oct 05, 2010 9:30 pm Posts: 708 Location: Greeley
|
Re: New to Colorado.
"Kato" would be my suggestion.
|
Wed Oct 02, 2013 11:24 pm |
|
|
D&D72
Official CCB Member
Joined: Sun Sep 11, 2011 10:49 pm Posts: 988 Location: Henderson, Co. Grand Lake, Co
|
Re: New to Colorado.
I'm with Casa, "Kato" would be an excellent name!
_________________ That guy John.... whatta Jerk.
|
Sat Oct 05, 2013 7:36 am |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: New to Colorado.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Sat Oct 05, 2013 10:47 am |
|
|
Viperwolf1
Official CCB Member
Joined: Tue May 07, 2013 10:37 pm Posts: 1485
|
Re: New to Colorado.
|
Sat Oct 05, 2013 12:41 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: New to Colorado.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Sat Oct 05, 2013 3:51 pm |
|
|
Eck
Official CCB Member
Joined: Thu Oct 25, 2012 9:33 pm Posts: 2460
|
Re: New to Colorado.
I think you should go with Slimer.
_________________ 69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
|
Sat Oct 19, 2013 12:21 am |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: New to Colorado.
Have you seen what the car looks like now? Sad! Here is the article... http://www.news.com.au/entertainment/mo ... 6739825502
You do not have the required permissions to view the files attached to this post.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Sat Oct 19, 2013 11:00 am |
|
|
|
|
Page 1 of 1
|
[ 24 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|