Yolk size looks right, not sure about the short nose spec, but in the description it says it is a spool, not usually what you want for a street rig.
| www.ColoradoClassicBroncos.com http://coloradoclassicbroncos.com/ |
|
| Let’s talk RearEnds… http://coloradoclassicbroncos.com/viewtopic.php?f=4&t=10686 |
Page 1 of 1 |
| Author: | mickphatmac [ Thu Jul 22, 2021 4:30 pm ] |
| Post subject: | Let’s talk RearEnds… |
I’m looking at having my rear end center section rebuilt but I ran across this from JEGS with free shipping, it looks like a pretty good deal to me but I don’t know any of the specs if it will fit my rig or not correctly I wan’t plug and play. My ‘68 is totally stock with no lockers or anything like that, is this the same size yolk and did I mention it has to be plug and play!!?? No locker Ford 9 inch 4.11 Gears 28 spline |
|
| Author: | Woodscaper [ Thu Jul 22, 2021 5:33 pm ] |
| Post subject: | Re: Let’s talk RearEnds… |
https://m.youtube.com/watch?v=X53ZSxkQ3Ho Here is some good info on rear ends. |
|
| Author: | mickphatmac [ Thu Jul 22, 2021 6:03 pm ] |
| Post subject: | Re: Let’s talk RearEnds… |
That’s some good info I could really get behind. |
|
| Author: | Kinder [ Fri Jul 23, 2021 8:11 am ] |
| Post subject: | Re: Let’s talk RearEnds… |
Yolk size looks right, not sure about the short nose spec, but in the description it says it is a spool, not usually what you want for a street rig.
|
|
| Author: | mickphatmac [ Fri Jul 23, 2021 9:24 am ] |
| Post subject: | Re: Let’s talk RearEnds… |
Dang, you're right. I don't want that! Does anyone have Jasons # at crawler creations? Or the name of his business? |
|
| Author: | Kinder [ Fri Jul 23, 2021 9:26 am ] |
| Post subject: | Let’s talk RearEnds… |
Jason’s Auto Repair, he has a FB page and his work # is (720) 787-4695. https://www.facebook.com/jasonsautodr/ |
|
| Author: | Eck [ Fri Jul 23, 2021 10:08 am ] |
| Post subject: | Re: Let’s talk RearEnds… |
If Jason is too busy (I was just over there recently and he’s got a lot of projects in there right now), you can also give David at Dusty Dog Garage a call. Another CCB member with lots of experience with these things. http://dustydoggarage.com Sent from my iPhone using Tapatalk |
|
| Author: | mickphatmac [ Fri Jul 23, 2021 11:36 am ] |
| Post subject: | Re: Let’s talk RearEnds… |
| Author: | mickphatmac [ Fri Jul 23, 2021 11:36 am ] |
| Post subject: | Re: Let’s talk RearEnds… |
| Author: | landshark [ Sun Jul 25, 2021 12:51 pm ] |
| Post subject: | Re: Let’s talk RearEnds… |
There is also a guy up in Erie who does nothing but Ford 9” builds. He’s built 3 of mine including the one in the racer. He should be on Craigslist. I would call and tell him what you want and go from there. Prices are competitive to online bought |
|
| Author: | mickphatmac [ Mon Jul 26, 2021 1:19 pm ] |
| Post subject: | Re: Let’s talk RearEnds… |
Thanks for the leads! I'll try the craigslist guy, The other 2 never responded. |
|
| Author: | landshark [ Mon Jul 26, 2021 4:25 pm ] |
| Post subject: | Re: Let’s talk RearEnds… |
https://denver.craigslist.org/pts/d/for ... 13067.html His name is Dan |
|
| Author: | mickphatmac [ Mon Jul 26, 2021 4:43 pm ] |
| Post subject: | Re: Let’s talk RearEnds… |
I’m on it, thank you guys!! |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|