www.ColoradoClassicBroncos.com http://coloradoclassicbroncos.com/ |
|
how many degrees of timing are you running http://coloradoclassicbroncos.com/viewtopic.php?f=4&t=3827 |
Page 1 of 1 |
Author: | trei75bronco [ Wed Apr 04, 2012 8:26 pm ] |
Post subject: | how many degrees of timing are you running |
what is your timing I have duraspark .037 gap on plugs, torquercam , And im wondering wherr I should be |
Author: | ZOSO [ Wed Apr 04, 2012 8:41 pm ] |
Post subject: | Re: how many degrees of timing are you running |
Start at 10* base and adjust from there. |
Author: | trei75bronco [ Wed Apr 04, 2012 8:58 pm ] |
Post subject: | Re: how many degrees of timing are you running |
I wanna say im at 12 but im a,tad rich |
Author: | ZOSO [ Thu Apr 05, 2012 6:36 am ] |
Post subject: | Re: how many degrees of timing are you running |
Adding timing makes it run leaner. If your running rich not much an ignition system can do. Your running the bowelled correct? |
Author: | sbolt19 [ Thu Apr 05, 2012 9:48 am ] |
Post subject: | Re: how many degrees of timing are you running |
Isn't base timing at 6? The way I learned was 1 degree for every 1000 feet in elevation, so depending on where you are in Colorado, you could be anywhere from 10 up. Here in the Springs, I always ran at 12 and never had a problem. |
Author: | trei75bronco [ Thu Apr 05, 2012 12:43 pm ] |
Post subject: | Re: how many degrees of timing are you running |
I think.the tbi just runs a little rich |
Author: | Booger [ Fri Apr 06, 2012 5:08 am ] |
Post subject: | Re: how many degrees of timing are you running |
Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |