| www.ColoradoClassicBroncos.com http://coloradoclassicbroncos.com/ |
|
| Fuel pressure regulator http://coloradoclassicbroncos.com/viewtopic.php?f=4&t=9084 |
Page 1 of 1 |
| Author: | BOBS 2 68S [ Thu Jun 22, 2017 5:19 am ] |
| Post subject: | Fuel pressure regulator |
I am changing back to the Edelbrock carb. This time with a fuel pressure regulator. Found that Edelbrock carbs do not like high fuel pressure. Those that are running regulators where did you mount it. I have the Holley adjustable with gage port. I am using a drop base air cleaner so mounting off the carb base will not realy work. I thought about mounting to a inner fender or fire wall but a bit worried about the longer fuel lines. |
|
| Author: | Gunnibronco [ Thu Jun 22, 2017 6:46 am ] |
| Post subject: | Re: Fuel pressure regulator |
I ran one for years mounted on the front of the intake manifold, near the t-stat housing. Mine was a Mallory with a return line to the tanks. |
|
| Author: | ZOSO [ Thu Jun 22, 2017 7:25 am ] |
| Post subject: | Re: Fuel pressure regulator |
as close to the carb as possible. And yes edelbrocks don't like over 5-5.5psi |
|
| Author: | Booger [ Thu Jun 22, 2017 9:23 am ] |
| Post subject: | Re: Fuel pressure regulator |
3 psi is a good wheeling pressure just a bit to low for the road. Mount it as close as you can to carb to minimize vapor lock. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|