| www.ColoradoClassicBroncos.com http://coloradoclassicbroncos.com/ |
|
| Radiator shop recommendation http://coloradoclassicbroncos.com/viewtopic.php?f=4&t=9338 |
Page 1 of 1 |
| Author: | ScottBarnes [ Tue Dec 05, 2017 5:16 pm ] |
| Post subject: | Radiator shop recommendation |
Hey guys - I’m looking for a local recommendation for a radiator shop to vat and pressure test mine. Thanks - Scott Sent from my iPad using Tapatalk |
|
| Author: | Eck [ Tue Dec 05, 2017 6:32 pm ] |
| Post subject: | Re: Radiator shop recommendation |
I took mine to Intermountain Radiator to do the same and then switch the inlets/outlets for the explorer front dress swap. I don’t remember the cost but it was very fair. You may ask them if they do that on site or if they recommend a place that does it. Only problem is it’s North Denver. But you can drop it off and go grab a beer with me!! Sent from my iPhone using Tapatalk |
|
| Author: | mickphatmac [ Tue Dec 05, 2017 10:34 pm ] |
| Post subject: | Re: Radiator shop recommendation |
Not pertinent to your exact question but I saw some fancy new-ish radiator parts on steamboat craigslist https://rockies.craigslist.org/pts/6414254727.html |
|
| Author: | ScottBarnes [ Wed Dec 06, 2017 2:51 pm ] |
| Post subject: | Re: Radiator shop recommendation |
| Author: | ScottBarnes [ Wed Dec 06, 2017 2:52 pm ] |
| Post subject: | Re: Radiator shop recommendation |
| Author: | Eck [ Wed Dec 06, 2017 5:53 pm ] |
| Post subject: | Re: Radiator shop recommendation |
That’s insane. May as well buy a new Champion at that point. Mine was less than $100 for them to test and solder the holes to the opposite sides... Just let me know when- I’m working from home a majority of the next couple of weeks. Sent from my iPhone using Tapatalk |
|
| Author: | landshark [ Thu Dec 07, 2017 8:41 am ] |
| Post subject: | Re: Radiator shop recommendation |
I think I paid $40 to have mine cleaned and pressure tested on my 76. |
|
| Author: | ScottBarnes [ Thu Dec 07, 2017 8:55 am ] |
| Post subject: | Re: Radiator shop recommendation |
| Author: | landshark [ Thu Dec 07, 2017 9:08 am ] |
| Post subject: | Re: Radiator shop recommendation |
I have been running the stock brass one in my 76 since i had to tested about 4-5 years ago and will replace it here soon. Never had any issues with it but I flushed it out over the summer, there was allot of scale in it. I guess it is 41 years old... |
|
| Author: | ScottBarnes [ Thu Dec 07, 2017 9:18 am ] |
| Post subject: | Re: Radiator shop recommendation |
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|