| www.ColoradoClassicBroncos.com http://coloradoclassicbroncos.com/ |
|
| Saggy stance http://coloradoclassicbroncos.com/viewtopic.php?f=4&t=9365 |
Page 1 of 1 |
| Author: | Rox Crusher [ Sun Dec 31, 2017 5:03 pm ] |
| Post subject: | Saggy stance |
Installed a WH 3.5” suspension years ago, probably 2010. WH front springs are known to settle a fair bit during first year, which mine did, so I installed 4.5” springs up front. Now, a couple years later, the rear seems to be settling / sagging and I️ don’t like the stance. ANy input on what to expect if I were to get new 3.5” springs ? |
|
| Author: | Dirtheadz [ Sun Dec 31, 2017 6:12 pm ] |
| Post subject: | Re: Saggy stance |
I'm a fan of Prerunner sag (ofcaorse I'm odd X desert guy). Could always do a thin add-a-leaf... just a thought |
|
| Author: | ZOSO [ Sun Dec 31, 2017 6:34 pm ] |
| Post subject: | Re: Saggy stance |
Add more weight to the front. Mine has finally settled out after sitting nose low for years. |
|
| Author: | horseplay [ Sun Dec 31, 2017 11:31 pm ] |
| Post subject: | Re: Saggy stance |
you could have your springs re-arched @ Denver spring. |
|
| Author: | BroncoCrawler [ Mon Jan 01, 2018 10:10 am ] |
| Post subject: | Re: Saggy stance |
To be honest I would not have your springs re-arched. I worked at Denver spring for a year and saw the process they use. The re-arch rarley lasts especially if your gonna wheel it and stress the springs. They will probably offer to add a leaf also but it most likely will be one big thick leaf and ride rougher and hurt articulation. When I redid my springs two years ago. I ordered 2" fronts and 3.5" rears...... Now with all my tools. New rear bumper, high lift, spare, full 24gal fuel I sag a 1/2". Wish I would of bought 4.5" rears. These are deavers from Jeff's. Sent from my XT1254 using Tapatalk |
|
| Author: | horseplay [ Mon Jan 01, 2018 11:13 am ] |
| Post subject: | Re: Saggy stance |
good to know that it seems to be a short term solution. |
|
| Author: | Jesus_man [ Mon Jan 01, 2018 5:21 pm ] |
| Post subject: | Re: Saggy stance |
Mine did that as well. I ended up ordering a new set of 11-leafs from Tom's. Now it's level. I think wheeling is just hard on them all. |
|
| Author: | Gunnibronco [ Mon Jan 01, 2018 5:40 pm ] |
| Post subject: | Re: Saggy stance |
Do you think it will continue to sag worse? What is the measurement between the rear axle & frame? Will you loose important wheel clearance in the front if you drop to a shorter front spring, to match the existing rear lift? Get a damn winch! |
|
| Author: | mickphatmac [ Tue Jan 02, 2018 10:51 am ] |
| Post subject: | Re: Saggy stance |
....I'm interested in your Old Saggys! |
|
| Author: | landshark [ Tue Jan 02, 2018 5:21 pm ] |
| Post subject: | Re: Saggy stance |
| Author: | Rox Crusher [ Tue Jan 02, 2018 6:31 pm ] |
| Post subject: | Re: Saggy stance |
| Author: | Eck [ Tue Jan 02, 2018 7:27 pm ] |
| Post subject: | Re: Saggy stance |
Maybe you could hang some truck nuts off the front bumper to help your saggy problem. Sent from my iPhone using Tapatalk |
|
| Author: | Rox Crusher [ Mon Mar 12, 2018 7:02 pm ] |
| Post subject: | Re: Saggy stance |
Well, got a helluva good deal on a Warn winch at 4WP sale this week end. Also, while working on the rear end this week end i found that the axle shim on the driver’s side had rotated such that it was almost perpendicular to the leaf springs. Pounded it back in line which should help a little. We’ll see what the winch does. |
|
| Author: | landshark [ Mon Mar 12, 2018 7:22 pm ] |
| Post subject: | Re: Saggy stance |
| Author: | Rox Crusher [ Tue Mar 13, 2018 5:18 am ] |
| Post subject: | Re: Saggy stance |
| Author: | hockeydad4-22 [ Tue Mar 13, 2018 7:13 am ] |
| Post subject: | Re: Saggy stance |
.[/quote] I set the torque wrench to “stupid tight”[/quote] Both of my son's favorite torque setting as well... |
|
| Author: | Rox Crusher [ Thu Mar 15, 2018 6:32 pm ] |
| Post subject: | Re: Saggy stance |
Well, I think I found the real culprit. 9EA00B3F-BD27-4EF4-883F-1CAF7C342EA4.jpeg |
|
| Author: | landshark [ Thu Mar 15, 2018 7:20 pm ] |
| Post subject: | Re: Saggy stance |
| Author: | sykanr0ng [ Thu Mar 15, 2018 8:30 pm ] |
| Post subject: | Re: Saggy stance |
Heavy Duty Boomerang styled rear spring shackles. |
|
| Author: | Jesus_man [ Fri Mar 16, 2018 7:02 am ] |
| Post subject: | Re: Saggy stance |
I'll bet that was making a little racket! |
|
| Author: | Rox Crusher [ Fri Mar 16, 2018 10:00 am ] |
| Post subject: | Re: Saggy stance |
| Author: | Rox Crusher [ Fri Mar 16, 2018 10:02 am ] |
| Post subject: | Re: Saggy stance |
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|