Leaf Spring Centering Bolts

Get answers to Bronco-related technical issues.

Leaf Spring Centering Bolts

Postby Jesus_man » Mon May 09, 2011 1:58 pm

Where can you get them locally? Not at a local auto parts store. Haven't tried napa yet, but they aren't real local for me. Trying to combine two different leaf packs and the spare bolts I have are too big to fit one set.

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
 
Posts: 5987
Joined: Thu Nov 11, 2010 9:36 am
Location: California

Re: Leaf Spring Centering Bolts

Postby Jesus_man » Mon May 09, 2011 2:02 pm

Ok, did find some at Napa. Was hoping for closer, but beggars can't be choosers.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
 
Posts: 5987
Joined: Thu Nov 11, 2010 9:36 am
Location: California

Re: Leaf Spring Centering Bolts

Postby Jesus_man » Mon May 09, 2011 4:15 pm

I figured drivetrain would as well, but they are further than Napa. Going to try to get to Napa tonight before they close.

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
 
Posts: 5987
Joined: Thu Nov 11, 2010 9:36 am
Location: California

Re: Leaf Spring Centering Bolts

Postby Colorado75bronc » Mon May 09, 2011 6:07 pm

rocky mountain spring 719-528-8418 they have anything spring related and will bend up u-bolts of any size for ya in about 5mins while you wait, and they have plenty of center pins in stock
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
 
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: Leaf Spring Centering Bolts

Postby Jesus_man » Wed Jun 01, 2011 2:44 pm

Finally got a descent picture of my bronco after the new leaf springs. Wow, didn't realize how much the others were sagging!

Before:
Image

After:
Image

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
 
Posts: 5987
Joined: Thu Nov 11, 2010 9:36 am
Location: California

Re: Leaf Spring Centering Bolts

Postby Colorado75bronc » Fri Jun 03, 2011 7:48 pm

looks great man, and ya it was sagging really bad, i remember when ya drove past me at the last springs breakfast, it was def. draggin' tail
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
 
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm


Return to General 4x4 Technical

Who is online

Users browsing this forum: No registered users and 4 guests

cron