by RJLougee » Fri Jun 19, 2020 1:34 pm
When you check the battery voltage, it sits somewhere over 13 volts, in the vehicle, connected?
So if the battery is good, then it can pretty much only be cables/cable ends not making good contact.
Lights are wired direct to the switch, they don't go through the ignition switch. They may be powered through the fusible link on the starter solenoid, been too long since I looked at that.
What changed since the last time it worked correctly?
Joe
'70 Bronco, MAF 5.0, NP435, D44/9", 4.10s, 33" MT/Rs, PS/PB
'71 Bronco, HP D60, Hi-9, 5.38/ARBs, 101" WB, 408 Stroker, AOD, Atlas, 40" MT/Rs, PiMP EFI.
'78 F150 SWB/Stepside/4WD, 351W/4R100/NP205, 35" KM2s, under const...
'81 Coachman Caper XL MH, 4WD, EFI 460/ZF/BW1356, D44/Sterling, 4.10s/35s, under const...
'83 Bronco, D60/Sterling, 5.13/ARBs, MAF EFI 351W/ZF/BW1356, 37" MT/Rs.
'12 Buggy, HPD60, Hi-9, 4.10s, Explorer 5.0, Atlas 4-speed, my chassis, EB skins.
And the latest project is a '99 Ranger Extra-Cab, custom frame/tube work, on 40s...