|
|
It is currently Sat Jun 29, 2024 12:17 am
|
bleeding brakes, seeking advice
| Author |
Message |
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
 Re: bleeding brakes, seeking advice I found the info on some mustang forums about it.
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Tue Jun 07, 2011 12:52 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: bleeding brakes, seeking advice I just spent 20 mins on the phone with BC Broncos, they assured me that my m/c should work with the t-bird calipers. They've installed t-bird calipers on all sorts of masters with no problems. He said that I now have my m/c hooked up backwards. He said that the REAR (closest to the driver) line from the m/c feeds the front brakes. He said that was how all m/c work, that way when you are just slightly pushing on the pedal, the m/c was only feeding the front brakes. I was ready to buy new stainless F150 hoses & he discouraged me and insisted my combo should work. I'm confused.
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Tue Jun 07, 2011 1:20 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: bleeding brakes, seeking advice Took some time at work and looked at a few cars. Seems all master cylinders are plumbed the same. The rear line (many times the smaller line) runs the front brakes. I switched my m/c lines & dropped the truck at the service department. They should bleed my brakes tomorrow & I'll report back.
Chad
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Tue Jun 07, 2011 4:58 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: bleeding brakes, seeking advice
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Wed Jun 08, 2011 12:10 pm |
|
|
|
Shawns Fords
Official CCB Member
Joined: Sat Oct 02, 2010 7:36 pm
Posts: 779
Images: 0
|
Re: bleeding brakes, seeking advice Glad you figured it out. I cant wait to get my brakes finished on mine. Your thread has helped me with getting ready. LOL
|
| Wed Jun 08, 2011 9:21 pm |
|
|
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
