| Author |
Message |
|
treads
Official CCB Member
Joined: Wed Feb 23, 2011 4:22 pm
Posts: 31
Location: Englewood
|
 4x4x2 steering box I just did the 4x4x2 steering box swap and after turning lock to lock for 20 mins with the front wheels off the ground, I still don't have power steering to the right. It works turning left but not to the right. And that's with load on the front wheels.
|
| Sat Sep 24, 2011 10:11 am |
|
|
|
Viperwolf1
|
Re: 4x4x2 steering box Bad internal o-ring or seal.
|
| Sat Sep 24, 2011 11:11 am |
|
|
|
treads
Official CCB Member
Joined: Wed Feb 23, 2011 4:22 pm
Posts: 31
Location: Englewood
|
Re: 4x4x2 steering box Any idea on witch one and what part of the steering box it is in?
|
| Sat Sep 24, 2011 2:27 pm |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: 4x4x2 steering box Must be the nature of the box. The one on my 79 does the same thing. Just only when cold. I've replaced everything and it still does it.
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Sat Sep 24, 2011 3:27 pm |
|
|
|
Viperwolf1
|
Re: 4x4x2 steering box
|
| Sat Sep 24, 2011 4:09 pm |
|
|
|
treads
Official CCB Member
Joined: Wed Feb 23, 2011 4:22 pm
Posts: 31
Location: Englewood
|
Re: 4x4x2 steering box I just put a new seal kit in it when I built the box. I guess I need to just take it back apart and see if anything moved. I was hoping that I did not have to take it apart but no such luck
|
| Sat Sep 24, 2011 4:34 pm |
|
|
|
rtreads
Official CCB Member
Joined: Sun Jan 02, 2011 9:37 pm
Posts: 320
|
Re: 4x4x2 steering box Maybe try bi-directional fluid?
|
| Sat Sep 24, 2011 4:51 pm |
|
|
|
Booger
Official CCB Member
Joined: Thu Dec 23, 2010 6:55 pm
Posts: 809
Location: Broomfield
|
Re: 4x4x2 steering box
_________________
Bob - Turning hydrocarbons into noise since 1970
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
|
| Sun Sep 25, 2011 7:37 am |
|
|
|
treads
Official CCB Member
Joined: Wed Feb 23, 2011 4:22 pm
Posts: 31
Location: Englewood
|
Re: 4x4x2 steering box I found a torn seal on the input shaft. No one sells it in town and I had to order a complete seal kit from west coast broncos. This new box is a real pain in the butt and would never do it again 
|
| Tue Sep 27, 2011 11:00 am |
|
|
|
crawlercreations
Official CCB Member
Joined: Sat Nov 06, 2010 9:36 pm
Posts: 1101
Location: Arvada
|
Re: 4x4x2 steering box You are going to love that box when it is all done! Almost everything on an eb is a pita until it is done and you get to enjoy it! Take a step back and remember once it is done you shouldn't have to mess with it again!
Going to be ready for chinaman gulch this saturday? :)
_________________
There is a fine line between "hobby" and "mental illness"
|
| Tue Sep 27, 2011 11:05 am |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: 4x4x2 steering box x2. My 4x4x2 box turns my 35x13.5s with one finger easy.
|
| Tue Sep 27, 2011 7:40 pm |
|
|
|
rtreads
Official CCB Member
Joined: Sun Jan 02, 2011 9:37 pm
Posts: 320
|
Re: 4x4x2 steering box
|
| Sat Oct 22, 2011 9:36 pm |
|
|
|
