| Author |
Message |
|
trei75bronco
Official CCB Member
Joined: Wed Jan 26, 2011 10:55 pm
Posts: 837
Images: 0
|
 300m bc output ? Does anyone have obe of these...is there a way to verify its a 300m steel?
|
| Fri Jan 03, 2014 6:40 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: 300m bc output ? Is this the T-case output?
|
| Fri Jan 03, 2014 7:17 pm |
|
|
|
trei75bronco
Official CCB Member
Joined: Wed Jan 26, 2011 10:55 pm
Posts: 837
Images: 0
|
Re: 300m bc output ? Yes sir
|
| Fri Jan 03, 2014 11:39 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: 300m bc output ? Are they still made? I'd be pretty interested. All the references I could find were from around 2005.
|
| Sat Jan 04, 2014 12:45 am |
|
|
|
Viperwolf1
Official CCB Member
Joined: Tue May 07, 2013 10:37 pm
Posts: 1485
|
Re: 300m bc output ? I think the BC shafts were made to the same dimensions as the stock shafts. Unfortunately the stock shafts are one of the few parts that don't have a dana part number stamped on them. There could be some differences in the radiuses between the journals and splines though. The stockers are as square cut as can be.
Here's a stocker.Bronco 047s.jpg
You do not have the required permissions to view the files attached to this post.
|
| Sat Jan 04, 2014 1:20 am |
|
|
|
trei75bronco
Official CCB Member
Joined: Wed Jan 26, 2011 10:55 pm
Posts: 837
Images: 0
|
Re: 300m bc output ? I looked at my spare one vs the 300m shaft and the machine work is night and day different. . Phil instead of a breather the guy installed a hose fitting and reason?
Pictures
Stock output
300m
300m on left
|
| Sat Jan 04, 2014 9:38 am |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: 300m bc output ? the probably added the hose fitting so they could locate the breather up higher
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Sat Jan 04, 2014 11:59 am |
|
|
|
trei75bronco
Official CCB Member
Joined: Wed Jan 26, 2011 10:55 pm
Posts: 837
Images: 0
|
Re: 300m bc output ? Thats what I was wondering or extra oil port?
|
| Sat Jan 04, 2014 12:40 pm |
|
|
|
Viperwolf1
Official CCB Member
Joined: Tue May 07, 2013 10:37 pm
Posts: 1485
|
Re: 300m bc output ?
|
| Sun Jan 05, 2014 1:15 am |
|
|
|
Viperwolf1
Official CCB Member
Joined: Tue May 07, 2013 10:37 pm
Posts: 1485
|
Re: 300m bc output ? What's up with that bearing in the stock output shaft? Looks like more than 13 rollers and looks like some kind of center race.
|
| Sun Jan 05, 2014 1:19 am |
|
|
|
trei75bronco
Official CCB Member
Joined: Wed Jan 26, 2011 10:55 pm
Posts: 837
Images: 0
|
Re: 300m bc output ? First does that look like a aftermarket shaft..? Second I have a 1" body lift so hopefully it's enough. . I have the roller bearing packed in grease with a tube insert holding them in works good
|
| Sun Jan 05, 2014 8:42 am |
|
|
|
Viperwolf1
Official CCB Member
Joined: Tue May 07, 2013 10:37 pm
Posts: 1485
|
Re: 300m bc output ? Yes it does look aftermarket.
|
| Sun Jan 05, 2014 11:54 am |
|
|
|
