|
It is currently Tue Nov 05, 2024 2:05 am
|
|
Page 1 of 1
|
[ 16 posts ] |
|
Author |
Message |
Lobobronco
Official CCB Member
Joined: Wed Sep 29, 2010 9:20 am Posts: 289 Location: Denver, CO
|
Tips & Tricks
Thought it would be good to start a thread on "'Tips and Tricks"....
I know it is great when someone gives me the "easy" way to do something, so thought with all this knowledge around maybe we could start a thread.
Could be anything from as easy as "bring a tarp along to throw down when you are going to have to work on the truck in the muck". Yup...carry one all the time now and have one for the driveway!
Post up and tell us how to do it easier!!!!
Matt
_________________ Her name is Lucy...and well...that's who she is!
|
Sat Dec 11, 2010 8:41 pm |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Tips & Tricks
Good idea. Here's one that I use.
For anyone running a carb off road should have the spring loaded needle and seats. Also a trick I use is put a fuel pressure regulator in. And when going wheelin turn it down to 2psi or so. Just DONT forget to turn the pressure back up before hitting the road or you'll run it lean. The lower fuel pressure keeps the carb from flooding when the floats are bouncing.
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Sat Dec 11, 2010 8:44 pm |
|
|
Entourage
Official CCB Member
Joined: Wed Sep 29, 2010 5:45 pm Posts: 3275 Location: Gilbert, Arizona
|
Re: Tips & Tricks
Bring ViperWolf.
_________________ "I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
|
Mon Dec 13, 2010 9:23 pm |
|
|
Viperwolf1
|
Re: Tips & Tricks
This is applicable to almost everything. Before you take something apart take digital pictures. When you're taking it apart bag/label the parts. Take more pictures. When you have an assembly taken apart put the bolts/screws back in there original holes if possible so you so you know where they all are and where they go.
|
Mon Dec 13, 2010 9:48 pm |
|
|
hockeydad4-22
Official CCB Member
Joined: Tue Nov 02, 2010 1:11 pm Posts: 2378 Location: Highlands Ranch Colorado
|
Re: Tips & Tricks
When checking electrical issues - Check the ground first. I have lost count of the times I have chased all over a vehicle looking for a short, bad switch or relay, only to find a loose or broken ground.
_________________ [color=#BFFF40]Greg
If you are the smartest person in the room - You are in the wrong room
|
Tue Dec 14, 2010 7:57 am |
|
|
Brianut
Official CCB Member
Joined: Thu Oct 14, 2010 7:06 am Posts: 350 Location: Parker,Co
|
Re: Tips & Tricks
|
Tue Dec 14, 2010 12:42 pm |
|
|
Viperwolf1
|
Re: Tips & Tricks
|
Tue Dec 14, 2010 8:01 pm |
|
|
Colorado75bronc
Official CCB Member
Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: Tips & Tricks
here's a couple, i know more but this came to mind first, if you run a holley set your float levels low, to where your have to rock the truck to get the fuel to slosh out of the sight hole, this helps drastically with offroad performance, you can also make a cross-over vent tube and install a vent whistle, but those other mods are a little more in depth, classicbroncos.com has a write up on holley carb offroad tips/tricks, and so far i've been far more impressed with my properly setup holley offroad than any of the multiple edelbrocks i've had over the years, although i haven't thoroughly put it thorough its paces, ive been over some pretty good hills, and thorough some rough ditches and ruts that it used to complain on with the edelbrock, i just gotta get it in the rocks now, but i still can't wait till i have all the stuff for efi
if installing a body lift and you don't have access to a shop lift, set e-brake and chock the wheels, loosen one whole side of the body a couple turns on each bolt, remove all the bolts from the other side, and use a 2x4 or 4x4 thats as long as your rocker panel or close to and a highlift jack, 2 preferably for safety, but you can with one, complete the body lift on that side of the truck, tighten the completed side down snug, repeat on the other side, also air hammers/air chisels make easy work of removing stubborn old bodymounts
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
|
Tue Dec 14, 2010 9:22 pm |
|
|
Viperwolf1
|
Re: Tips & Tricks
|
Tue Dec 14, 2010 10:47 pm |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Tips & Tricks
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Sun Jan 30, 2011 6:06 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Tips & Tricks
Learned a new one with my recent tranny install. When bleeding your slave cylinder, you should bleed it by normal means, but if you're not getting the pedal feel you want, there should be an inspection port on the tranny near the bell housing. Stick a pri-bar in there and manually push the slave cylinder back slowly to get rid of the stubborn bubbles. I did this once with a little improvement, but would like to try again.
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Jan 31, 2011 10:12 am |
|
|
Lobobronco
Official CCB Member
Joined: Wed Sep 29, 2010 9:20 am Posts: 289 Location: Denver, CO
|
Re: Tips & Tricks
As I just had the front bearing almost weld itself to the shaft....
Found a clamp type device from harbor freight (anyone is more than welcome to borrow) and then borrowed a 2 jaw puller from Autozone to get it off. Put a 3/16" plate over the end of the axle for a jacking point. Worked like a charm with a good 1/2" drive.
Matt
_________________ Her name is Lucy...and well...that's who she is!
|
Mon Jan 31, 2011 7:25 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Tips & Tricks
For your carb'ed guys - my dad (a diesel mechanic) told me to run a gallon of diesel in with the gas to help prevent vapor lock. Diesel has a higher boiling point so the mixture seems to give you a few more degrees before the fuel with turn to a gas.
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Tue Feb 01, 2011 10:03 am |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Tips & Tricks
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Tue Feb 01, 2011 7:22 pm |
|
|
rtreads
Official CCB Member
Joined: Sun Jan 02, 2011 9:37 pm Posts: 320
|
Re: Tips & Tricks
...always carry a spill kit on the trail. Leaks on the trail are not uncommon, and preventing damage to the enviroment will help to keep the trails open.
|
Mon Feb 14, 2011 6:03 pm |
|
|
gslack
Official CCB Member
Joined: Sat Jan 08, 2011 3:20 am Posts: 68 Images: 0 Location: Colorado Springs
|
Re: Tips & Tricks
id say carry food, tools, water, jumper cables etc inside ur car. i do at all times.
|
Mon Feb 28, 2011 5:09 pm |
|
|
|
|
Page 1 of 1
|
[ 16 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 4 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|