|
It is currently Wed Oct 02, 2024 12:22 am |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 10 posts ] |
| Previous topic | Next topic |
Mildly built 351W, F4TE Roller Block
| Author | Message |
|---|---|
|
Official CCB Member   Joined: Fri Jun 21, 2013 8:53 pm Posts: 1276 
|
 Mildly built 351W, F4TE Roller BlockI'm putting a feeler out there, judging interest in this engine.
- 1994 T4FE 351W roller block bored .030 over - Original crate engine built by Detroit Competition Engineering in late 2009, ~25k-30k miles - 9:1 compression - 4340 I-beam rods and forged pistons, ARP hardware - SFI 28oz flywheel and balancer - ProComp SBF 210 aluminum heads - CompCams 35-329-8 roller cam. (est 350HP @ 5000 rpm / 425 lbft @ 3500 rpm) [I also have the higher HP/higher RPM TrickFlow cam available as well] installed recently - CompCams timing chain (installed recently) - 1.6:1 CompCams roller rockers, ARP studs and guide plates - MSD distributor and wiring - Aluminum tall valve covers - High flow water pump - Miloden 7qt oil pan - Choice of Weiand Stealth or Edelbrock Torker II (new) intake. (Intake currently removed) - V-belt front dress with 130 amp 3G alternator and Saginaw P-pump Other stuff that can be included: - 36-1 crank wheel and 3.0l VR sensor with custom brackets - 1000 CFM FAST 4150 EFI throttle body - pre-wired Megasquirt EFI      I have $7100 in receipts. Asking $3000, but I'm not sure what the going rate is for a used crate engine, so I'm open to offers. _________________ Cummins R2.8 diesel, ZF5, AtlasII, HP44/BB9, ARBs, coiled / linked suspension, 37" KO2s, full cage, bumpers, etc. Build Thread: Average 23.5 mpg, Best tank: 25.1 mpg |
| Mon Dec 03, 2018 11:31 pm |
|
|
|
|
Official CCB Member  Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: Mildly built 351W, F4TE Roller Block That’s a great deal! If I have already built one. I would be all over it
_________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish" |
| Tue Dec 04, 2018 9:04 am |
|
|
|
|
Official CCB Member  Joined: Mon Feb 14, 2011 10:29 am Posts: 768 Location: The MHC
|
Re: Mildly built 351W, F4TE Roller Block What direction are you going now (re: why are you getting rid of this one)?
_________________ Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990. |
| Tue Dec 04, 2018 10:11 am |
|
|
|
|
Official CCB Member Joined: Sat Oct 02, 2010 9:41 pm Posts: 1201 Location: Erie
|
Re: Mildly built 351W, F4TE Roller Block _________________ 1975 Ranger Edition that I've had longer than I've been without it. |
| Tue Dec 04, 2018 10:44 am |
|
|
|
|
Official CCB Member Joined: Fri Jun 21, 2013 8:53 pm Posts: 1276
|
Re: Mildly built 351W, F4TE Roller Block _________________ Cummins R2.8 diesel, ZF5, AtlasII, HP44/BB9, ARBs, coiled / linked suspension, 37" KO2s, full cage, bumpers, etc. Build Thread: Average 23.5 mpg, Best tank: 25.1 mpg |
| Tue Dec 04, 2018 12:35 pm |
|
|
|
|
Official CCB Member  Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Mildly built 351W, F4TE Roller Block I don't want to derail your FOR SALE thread here, but I am certainly intrigued in what you have in mind for the diesel conversion. 2.8 Cummins?
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Tue Dec 04, 2018 4:11 pm |
|
|
|
|
Official CCB Member Joined: Fri Jun 21, 2013 8:53 pm Posts: 1276
|
Re: Mildly built 351W, F4TE Roller Block _________________ Cummins R2.8 diesel, ZF5, AtlasII, HP44/BB9, ARBs, coiled / linked suspension, 37" KO2s, full cage, bumpers, etc. Build Thread: Average 23.5 mpg, Best tank: 25.1 mpg |
| Tue Dec 04, 2018 4:35 pm |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Mildly built 351W, F4TE Roller Block I'm sorry. Didn't mean to let you cat out of his bag...
But I am so excited to a) have another diesel conversion to  over, and b) a R2.8 in an EB!!!!!!!Adapter? pfffttt a walk in the park for a fella like yourself! _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Tue Dec 04, 2018 6:09 pm |
|
|
|
|
Moderator   Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Mildly built 351W, F4TE Roller Block Damn that is very tempting to pick this up from ya if I had the funds. Im low key looking for a roller block to start a new build for the 3rd time.
_________________ Rob 74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories. 04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine New project: 77 Bronco Ranger, body work and more body work. Very little left of a 72 durango tan explorer sport |
| Tue Dec 04, 2018 9:32 pm |
|
|
|
|
Joined: Thu Aug 25, 2016 10:36 pm Posts: 5
|
Re: Mildly built 351W, F4TE Roller Block I’m interested give me a call 970-904-0955
|
| Mon Dec 17, 2018 10:01 pm |
|
|
|
|
|
Page 1 of 1 |
[ 10 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 4 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |