Steering stuff

[akaFrankCastle]

Need a drag link, track bar, and stock tie rods for non-inverted Y set up steering linkage. If you're tripping over some parts leftover after a tie rod over conversion, I'll help you get rid of them.

Also need a power steering pump bracket and pump.

Let me know what you've got and what you need for it.

[Colorado75bronc]

I've got a Saginaw bracket, no pump

Sent from my SAMSUNG-SM-G890A using Tapatalk

[akaFrankCastle]

I've got a Saginaw bracket, no pump

Sent from my SAMSUNG-SM-G890A using Tapatalk

Well, you've got the hard to find part. Let me know what you need for it.

Is it a late model OEM bracket?

[Kinder]

Your timing is good, just pulled the sag setup from Bubba Smurf, I should also have the track bar.

[ZOSO]

I've got a bunch of 351 parts. Including a sag pump and bracket. intake manifolds, carb, duraspark dist and wires and module, timing chain cover, water pump, pulleys, the whole front dress. Only thing not there unless you can convince Corey to give them is the accessory adaptors. Let me know if there is anything you want. I need the space in my garage.

[TOOLMAN]

I know I have a drag link laying around my shop.

I thought you were trying to get rid of stuff!

[akaFrankCastle]

I've got a bunch of 351 parts. Including a sag pump and bracket. intake manifolds, carb, duraspark dist and wires and module, timing chain cover, water pump, pulleys, the whole front dress. Only thing not there unless you can convince Corey to give them is the accessory adaptors. Let me know if there is anything you want. I need the space in my garage.

Including a sag pump and bracket
- yes please

intake manifolds
- have too many of those already

carb
- what kinda carb?

duraspark dist and wires and module
- running points just to get it moving, but maybe interested

timing chain cover
- yes please

water pump
- si

pulleys
- da

front dress
- yup

Tally that up and let me know what I owe you.

[akaFrankCastle]

I know I have a drag link laying around my shop.

I thought you were trying to get rid of stuff!

Ha! Yes, I am downsizing a bunch of stuff. And moving a bunch of stuff. These are just ankle biter things I need to wrap up the Baja.

[ZOSO]

I've got a bunch of 351 parts. Including a sag pump and bracket. intake manifolds, carb, duraspark dist and wires and module, timing chain cover, water pump, pulleys, the whole front dress. Only thing not there unless you can convince Corey to give them is the accessory adaptors. Let me know if there is anything you want. I need the space in my garage.

Including a sag pump and bracket
- yes please

intake manifolds
- have too many of those already

carb
- what kinda carb?

duraspark dist and wires and module
- running points just to get it moving, but maybe interested

timing chain cover
- yes please

water pump
- si

pulleys
- da

front dress
- yup

Tally that up and let me know what I owe you.

I'll figure out a price and shoot you pics tonight. Carb is an edelbrock 1406 650cfm electric choke. I have 2 edelbrock performer 351 intakes.

[akaFrankCastle]

I've got a bunch of 351 parts. Including a sag pump and bracket. intake manifolds, carb, duraspark dist and wires and module, timing chain cover, water pump, pulleys, the whole front dress. Only thing not there unless you can convince Corey to give them is the accessory adaptors. Let me know if there is anything you want. I need the space in my garage.

Including a sag pump and bracket
- yes please

intake manifolds
- have too many of those already

carb
- what kinda carb?

duraspark dist and wires and module
- running points just to get it moving, but maybe interested

timing chain cover
- yes please

water pump
- si

pulleys
- da

front dress
- yup

Tally that up and let me know what I owe you.

I'll figure out a price and shoot you pics tonight. Carb is an edelbrock 1406 650cfm electric choke. I have 2 edelbrock performer 351 intakes.

Already have an Edelbrock performer for this motor, so I'm good there. my other 351w is getting an OEM ford 4 barrel intake from a 69 cougar.

[Justin]

What, you don't need a factory 351w intake that's really, really blue?

[akaFrankCastle]

What, you don't need a factory 351w intake that's really, really blue?

Nope. I currently have just enough intakes. But thanks.

that EGR port on the intake would have been a deal breaker anyhow.

[akaFrankCastle]

Belong to anyone here? http://denver.craigslist.org/pts/5352121184.html

[Eck]

Frank- I might have an extra linkage with tie rod and drag link. I'm out of town but I'll check and send a picture on Friday if I do.

[akaFrankCastle]

Frank- I might have an extra linkage with tie rod and drag link. I'm out of town but I'll check and send a picture on Friday if I do.

Thanks

[Colorado75bronc]

It's a wildhorses bracket, $25

Sent from my SAMSUNG-SM-G890A using Tapatalk

[akaFrankCastle]

It's a wildhorses bracket, $25

Sent from my SAMSUNG-SM-G890A using Tapatalk

Done.

[Colorado75bronc]

Cool, are you going to be around Friday/tomorrow night around 7-7:30? I may be able to get it and the old free02 over to you in one shot.

Sent from my SAMSUNG-SM-G890A using Tapatalk

[akaFrankCastle]

Cool, are you going to be around Friday/tomorrow night around 7-7:30? I may be able to get it and the old free02 over to you in one shot.

Sent from my SAMSUNG-SM-G890A using Tapatalk

I'll be out of the house for most of the day Saturday. Aside from that I should be around the entire weekend.

[Colorado75bronc]

Sunday morning work then? And if so any particular time?

Sent from my SAMSUNG-SM-G890A using Tapatalk

[akaFrankCastle]

Sunday morning work then? And if so any particular time?

Sent from my SAMSUNG-SM-G890A using Tapatalk

Play it by ear. Things are moving rather quickly right now. (Closing date moving up.)

[Colorado75bronc]

OK sounds good, I'll call you Sunday morning

Sent from my SAMSUNG-SM-G890A using Tapatalk

[akaFrankCastle]

Frank- I might have an extra linkage with tie rod and drag link. I'm out of town but I'll check and send a picture on Friday if I do.

Any luck?

[Eck]

Frank- I might have an extra linkage with tie rod and drag link. I'm out of town but I'll check and send a picture on Friday if I do.

Any luck?

I sent you pics and you said it wouldn't work because it was a '66 linkage.

[akaFrankCastle]

Frank- I might have an extra linkage with tie rod and drag link. I'm out of town but I'll check and send a picture on Friday if I do.

Any luck?

I sent you pics and you said it wouldn't work because it was a '66 linkage.

Ah yes! Sorry. My brain is in a thousand places right now.

[Gunnibronco]

Frank- I might have an extra linkage with tie rod and drag link. I'm out of town but I'll check and send a picture on Friday if I do.

Any luck?

I sent you pics and you said it wouldn't work because it was a '66 linkage.

Can you send me pics?

What do you want for it? It wouldn't hurt to have extras around, not sure how my 66 steers.

Chad

[TOOLMAN]

I sent you pics and you said it wouldn't work because it was a '66 linkage.

Ah yes! Sorry. My brain is in a thousand places right now.

I'm pretty sure I have a drag link. We could do a deal...I kind of want that floor you have.

[akaFrankCastle]

I sent you pics and you said it wouldn't work because it was a '66 linkage.

Ah yes! Sorry. My brain is in a thousand places right now.

I'm pretty sure I have a drag link. We could do a deal...I kind of want that floor you have.

Are you referencing the rear cargo bed floor? If so, it's already sold.

[TOOLMAN]

Are you referencing the rear cargo bed floor? If so, it's already sold.

Dammit! Anyway, I think I have a drag link....