Looking for Chevy disk brake conversion parts.

[JGZ]

I'm looking for any Chevy disk brake conversion parts. Mostly the caliper brackets and spindles.If a ford set up is out there I would consider it also.
Thanks in advance.

[Mitche11]

Me too. The previous owner of my bronco converted the front to Disc, but they need replaced now. I’m thinking I have the Chevy conversion parts on the front, and I need to switch the rear to disc. Any news about what the Chevy parts I have on the front is good, and the rear disc info is helpful too. Thanks!


Sent from my iPad using Tapatalk

[landshark]

Me too. The previous owner of my bronco converted the front to Disc, but they need replaced now. I’m thinking I have the Chevy conversion parts on the front, and I need to switch the rear to disc. Any news about what the Chevy parts I have on the front is good, and the rear disc info is helpful too. Thanks!


Sent from my iPad using Tapatalk

If you already have the Chevy disk brake conversion on then I would leave it unless you expect to do allot of wheeling. There virtually no differences between the ford and Chevy dana44 conversion besides the ford having a slightly bigger knuckle opening. The larger opening is helpful if you have to pull the axles out. I THINK the Chevy spindles have 6 bolts holding them on. You would have to pull the hub/rotor off to check.

Rear ford 9” conversion I would lean toward the explorer conversion kit, but there other options out there.