|
It is currently Sun Nov 17, 2024 8:17 am |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 10 posts ] |
| Previous topic | Next topic |
WH 5.5" lIft
| Author | Message |
|---|---|
|
Official CCB Member   Joined: Sat Nov 06, 2010 9:36 pm Posts: 1101 Location: Arvada 
|
 Re: WH 5.5" lIftI have cage 5.5 inch coils up front with winch and bumper. They are pretty soft. Probably a little softer than the WH springs. I will grab a measurement after work today and let you know. I have a feeling it will be too high for you. I think WH sells 4.5 inch springs now don't they? Or is that BC broncos? I bet 4.5 would get you where you want. Got any pics of the modified front bumper? I am sure you changed it up a bit!
_________________ There is a fine line between "hobby" and "mental illness" |
| Fri Apr 22, 2011 6:53 am |
|
|
|
|
Moderator   Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: WH 5.5" lIft You've seen the 74. Ran into the same problem. It has a bad rake to it. The wh springs sag pretty bad
_________________ Rob 74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories. 04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine New project: 77 Bronco Ranger, body work and more body work. Very little left of a 72 durango tan explorer sport |
| Fri Apr 22, 2011 7:21 am |
|
|
|
|
Official CCB Member  Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: WH 5.5" lIft Maybe Corey can help you out!
viewtopic.php?f=3&t=105 _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Fri Apr 22, 2011 8:35 am |
|
|
|
|
Official CCB Member  Joined: Wed Sep 29, 2010 5:45 pm Posts: 3275 Location: Gilbert, Arizona
|
Re: WH 5.5" lIft I have the new WH 5.5" Lift. It as stiff as something made by Catepillar. I need to follow ZOSO's advice and pull one of the two shocks off each wheel to see if that helps. Anyway - you are always welcome to measure mine. Should be working on mine most of the weekend. I owe ya anyway for all of the help yesterday!
_________________ "I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix |
| Fri Apr 22, 2011 9:01 am |
|
|
|
|
Official CCB Member  Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: WH 5.5" lIft Not sure if they'll work for what you're doing, but you're welcome to the 5.5" front springs off my truck when I get those Duffs put in. They're stiff, but they'll fix that sag.
|
| Fri Apr 22, 2011 1:26 pm |
|
|
|
|
Official CCB Member  Joined: Wed Oct 06, 2010 10:04 am Posts: 740 Images: 0
|
Re: WH 5.5" lIft I've got the Cage 5.5" coils, 302, no winch but a heavy duty front bumper and my axle tube to frame height is 13" dead nuts.
|
| Fri Apr 22, 2011 2:09 pm |
|
|
|
|
Official CCB Member Joined: Sat Nov 06, 2010 9:36 pm Posts: 1101 Location: Arvada
|
Re: WH 5.5" lIft I just measured my bronco and found it sitting precisely at 12.5". 302, heavy cage, heavy bumper, winch. The coils are about 2 years old with mostly trail miles on them.
_________________ There is a fine line between "hobby" and "mental illness" |
| Fri Apr 22, 2011 5:51 pm |
|
|
|
|
Official CCB Member  Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: WH 5.5" lIft i've got the 4.5" coils up front, no winch or bumper yet, but i dont think i'll be of much help to ya as the measurements would be totally different as i have the fw hp d44 and the way i adapted my lower coil cups it added 3/4" to the height so i pretty much have 5.25" of lift up front, but so ya know i love my wh 4.5" coils, they ride great and not too stiff, not as soft as the cage coils, but still soft in my opinion and thats even with the super bound up stock radius arms that i still have under it
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's |
| Fri Apr 22, 2011 7:12 pm |
|
|
|
|
Moderator Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: WH 5.5" lIft _________________ Rob 74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories. 04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine New project: 77 Bronco Ranger, body work and more body work. Very little left of a 72 durango tan explorer sport |
| Fri Apr 22, 2011 7:19 pm |
|
|
|
|
Official CCB Member Joined: Tue Oct 05, 2010 11:23 am Posts: 11 Location: Thornton
|
Re: WH 5.5" lIft top left axle tube on inside of coil, to bottom of frame 11.3/4".
5.5 WH crawler coils 302, no winch, tube prerunner bumper with winch mount, 6 point cage and hard top on. looks like everyones is a little diffrent. _________________ 73', 302 w/EFI, C4, locked frt-rr, 5:13, 6"WH springs, 3" body, 35"MTR, 6pt cage. |
| Sat Apr 23, 2011 9:23 am |
|
|
|
|
|
Page 1 of 1 |
[ 10 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 0 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |