|
|
It is currently Sat Nov 16, 2024 9:51 pm
|
|
Page 1 of 1
|
[ 9 posts ] |
|
How to keep a Bronco from rusting
| Author |
Message |
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
 How to keep a Bronco from rusting Figured out how to prevent a Bronco from rusting:
1. Assemble your own power steering hose, having never done it before.
2. Fill your power steering reservoir really, really full.
3. Have said hose slip out of the fitting, blowing at least 1/2 a quart of PS fluid.
I've got PS fluid all over the inside of the engine bay, all 3 bays of my garage (with my Mazda parked in one of them) and all over my workshop. I think the highest dot of fluid I saw was at least 10' up the wall. Turn out 1500 psi can make a mess. At least I've rustproofed the truck for the next couple years.
The good news? I now have power steering. Thanks again to everyone at the shop day for helping make it happen. I think my Bronco wants to be a sports car now.
|
| Wed Jul 20, 2011 4:30 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: How to keep a Bronco from rusting I wish brake fluid had the same anti-corrosion properties. I used a pressure bleeder to bleed my brakes, only to have the make-shift lid cut loose & soak my engine compartment with brake fluid. The only thing it did was make my new Bloody Knuckle arms & freshly painted axles & steering look as bad as the rest of my truck. I really thought I had it all cleaned up, until the next morning when I noticed lots of wrinkling going on.
Power steering is in my list of top upgrades done to my truck. What a dream!
Chad
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Wed Jul 20, 2011 9:34 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: How to keep a Bronco from rusting It's amazing. I almost drove my truck into a tree the first time I turned it while moving. The 4x4x2 box is powerful and I can now 1 finger turn my 35x13.5 mudders on dry pavement. It's like magic.
|
| Wed Jul 20, 2011 9:49 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: How to keep a Bronco from rusting I ran for a couple years with no PS & 33's. I can't imagine getting into a parking place with 35's and no PS. Your arms must look like Arnold's did in Conan the Barbarian.
Its kind of like having to pull a tooth out of my steering wheel after adding power brakes. Then having to pull another tooth out of my steering wheel 10 years later when I upgraded to hydroboost. I'm not a fast learner. Good thing my family is full of dentists, LOL.
Chad
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Wed Jul 20, 2011 10:09 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: How to keep a Bronco from rusting Nice. Hydroboost is next on the list once I figure out what is going on with my fuel pump. Looking forward to some more stopping power.
|
| Wed Jul 20, 2011 10:24 pm |
|
|
|
Shawns Fords
Official CCB Member
Joined: Sat Oct 02, 2010 7:36 pm
Posts: 779
Images: 0
|
Re: How to keep a Bronco from rusting LOL atleast it is sealed for a few years.
|
| Wed Jul 20, 2011 10:29 pm |
|
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm
Posts: 4901
Images: 0
Location: Colorado Springs
|
Re: How to keep a Bronco from rusting
_________________
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
| Wed Jul 20, 2011 11:29 pm |
|
|
|
cobshane
Official CCB Member
Joined: Sat Nov 13, 2010 12:31 am
Posts: 516
Images: 1
Location: littleton
|
Re: How to keep a Bronco from rusting The best brake fluid cleanup is water and soap. Brake cleaner just does not do it. Brake fluid is some nasty stuff when it sits on paint.
|
| Thu Jul 21, 2011 1:04 am |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: How to keep a Bronco from rusting
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Thu Jul 21, 2011 7:03 am |
|
|
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
