|
It is currently Fri Nov 01, 2024 5:24 pm |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 7 posts ] |
| Previous topic | Next topic |
Offset Front Axle
| Author | Message |
|---|---|
|
Official CCB Member  Joined: Sat Jul 16, 2011 8:37 am Posts: 319 Location: Colorado Springs 
|
 Offset Front AxleWell, I'm not looking forward to the answer, but...I noticed after getting the front tires on my bronco that the driver's side tire extends beyond the fender like 2 inches while the passenger side tire sticks out from under the fender very little or not at all. I assume this can't be good. Might some of this be corrected when I replace C-bushings and do an allignment, or am I just grasping at straws? Thoughts?
You do not have the required permissions to view the files attached to this post. _________________ Now with disk brakes, has turned into my sons daily driver while he is home on Christmas break. |
| Sun Aug 26, 2012 8:54 pm |
|
|
|
|
Official CCB Member  Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: Offset Front Axle You need an adjustable trac bar, and or trac bar drop or riser bracket
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's |
| Sun Aug 26, 2012 9:04 pm |
|
|
|
|
Official CCB Member  Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: Offset Front Axle Yup. How much lift are you running? Your angles look pretty good, I'd start with an adjustable trac bar.
|
| Sun Aug 26, 2012 10:17 pm |
|
|
|
|
Official CCB Member Joined: Sat Jul 16, 2011 8:37 am Posts: 319 Location: Colorado Springs
|
Re: Offset Front Axle I have new shocks and new 3.5" WH springs in the front and new shocks, 3" blocks and old leaf springs in the back.
_________________ Now with disk brakes, has turned into my sons daily driver while he is home on Christmas break. |
| Mon Aug 27, 2012 6:50 am |
|
|
|
|
Official CCB Member  Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Offset Front Axle x3 on the adjustable track bar. You length it and it pushes the axle to back under center.
The track bar controls your left to right placement of the axle. It's connected to the drivers side frame and runs down to the passenger side of the axle. _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Mon Aug 27, 2012 7:25 am |
|
|
|
|
Official CCB Member  Joined: Tue Nov 02, 2010 1:11 pm Posts: 2378 Location: Highlands Ranch Colorado
|
Re: Offset Front Axle Agreed on the track bar - I highly recommend the axle riser bracket instead of the frame attached drop bracket. I could tell you why but they say a picture is worth 1000 words.... (see the tread for what happened to Drew's when his track bar drop bracket tore off, and the subsequent repairs.
viewtopic.php?f=5&t=854&p=9027&hilit=+track+bar#p9027 _________________ [color=#BFFF40]Greg If you are the smartest person in the room - You are in the wrong room |
| Mon Aug 27, 2012 9:05 am |
|
|
|
|
Official CCB Member Joined: Sat Jul 16, 2011 8:37 am Posts: 319 Location: Colorado Springs
|
Re: Offset Front Axle Ok, sounds like a plan! I am ordering the parts from WH now! Thanks all for the comments, they are much appreciated.
_________________ Now with disk brakes, has turned into my sons daily driver while he is home on Christmas break. |
| Mon Aug 27, 2012 10:02 am |
|
|
|
|
|
Page 1 of 1 |
[ 7 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 5 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |