Booger wrote:Looks like the patio might be a little cold this Saturday.
No kidding, Zack move our res to the inside, brrr...
www.ColoradoClassicBroncos.com
A place for Coloradans to unite with our love of 66-77 Ford Broncos
Third Annual Platte River Bar and Grill Meet & Greet
49 posts
• Page 2 of 2 • 1, 2
Re: Third Annual Platte River Bar and Grill Meet & Greet
by Kinder » Wed Oct 03, 2012 5:44 pm
No kidding, Zack move our res to the inside, brrr...
Best to Date MPG: 26.6
-
Kinder - Official CCB Member
- Posts: 4371
- Images: 0
- Joined: Wed Sep 29, 2010 9:03 pm
- Location: Parker, CO
Re: Third Annual Platte River Bar and Grill Meet & Greet
by cracker » Thu Oct 04, 2012 8:16 am
Doesn't look like we will be coming up, calling for flurries over night Friday and looks like we will be going to the Air Force vs. Navy game Sat. Have fun...
1-1966 Bronco
1-1967 Bronco
1-1969 Bronco
2-1973 Broncos
And a couple even run.....
1-1967 Bronco
1-1969 Bronco
2-1973 Broncos
And a couple even run.....
-
cracker - Official CCB Member
- Posts: 113
- Joined: Mon Oct 04, 2010 8:19 am
- Location: pueblo
Re: Third Annual Platte River Bar and Grill Meet & Greet
by crawlercreations » Fri Oct 05, 2012 10:06 am
I was really hoping to make this but no top and no doors makes for a very cold drive!
There is a fine line between "hobby" and "mental illness"
-
crawlercreations - Official CCB Member
- Posts: 1101
- Joined: Sat Nov 06, 2010 8:36 pm
- Location: Arvada
Re: Third Annual Platte River Bar and Grill Meet & Greet
by Justin » Fri Oct 05, 2012 1:19 pm
We could make the wrx an honorary Bronco8-)
-
Justin - Official CCB Member
- Posts: 6198
- Images: 0
- Joined: Sat Oct 09, 2010 11:04 pm
- Location: Lakewood
Re: Third Annual Platte River Bar and Grill Meet & Greet
by akaFrankCastle » Fri Oct 05, 2012 3:40 pm
COS guys still down for the convoy? If so, where and when?
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: Third Annual Platte River Bar and Grill Meet & Greet
by akaFrankCastle » Fri Oct 05, 2012 7:23 pm
Okay, I'm planning to leave the Diamond Shamrock gas station at I-25/HWY 83 and Academy Blvd at 10:00 tomorrow. I'll take 25-105 and proceed from there. That is unless anyone else chokes in with concerns or ideas.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: Third Annual Platte River Bar and Grill Meet & Greet
by Colorado75bronc » Fri Oct 05, 2012 11:37 pm
Sounds good to me we'll see ya there at 10 zac
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
-
Colorado75bronc - Official CCB Member
- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: Third Annual Platte River Bar and Grill Meet & Greet
by Booger » Sat Oct 06, 2012 4:40 am
Okay should see you guys around noon. Gotta get the Bronco started since it hasn't moved in a few months.
Bob - Turning hydrocarbons into noise since 1970
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
-
Booger - Official CCB Member
- Posts: 809
- Joined: Thu Dec 23, 2010 5:55 pm
- Location: Broomfield
Re: Third Annual Platte River Bar and Grill Meet & Greet
by hockeydad4-22 » Sat Oct 06, 2012 5:45 am
crawlercreations wrote:I was really hoping to make this but no top and no doors makes for a very cold drive!
I will be bringing the truck, wilma is still in pieces and a long ways from making a meet, drews little pony is going to hockey practice.
I say come in your daily driver.
[color=#BFFF40]Greg
If you are the smartest person in the room -
You are in the wrong room
If you are the smartest person in the room -
You are in the wrong room
-
hockeydad4-22 - Official CCB Member
- Posts: 2378
- Joined: Tue Nov 02, 2010 12:11 pm
- Location: Highlands Ranch Colorado
Re: Third Annual Platte River Bar and Grill Meet & Greet
by Colorado75bronc » Sat Oct 06, 2012 10:30 am
We're here, see you all soon!
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
-
Colorado75bronc - Official CCB Member
- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: Third Annual Platte River Bar and Grill Meet & Greet
by ClayJ » Sat Oct 06, 2012 12:47 pm
Hope your having fun. I'm bowling with my grand daughter
Clay
Clay
-
ClayJ - Official CCB Member
- Posts: 521
- Images: 0
- Joined: Fri Oct 01, 2010 7:45 am
- Location: Colorado Springs
Re: Third Annual Platte River Bar and Grill Meet & Greet
by ZOSO » Sat Oct 06, 2012 3:50 pm
Brrrrrr.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
-
ZOSO - Moderator
- Posts: 3908
- Joined: Mon Nov 15, 2010 4:58 pm
- Location: Henderson, Co
Re: Third Annual Platte River Bar and Grill Meet & Greet
by akaFrankCastle » Sat Oct 06, 2012 3:53 pm
Vragor wrote:Hope your having fun. I'm bowling with my grand daughter
Clay
I bet that bowling alley was warmer than that parking lot!
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: Third Annual Platte River Bar and Grill Meet & Greet
by Colorado75bronc » Sat Oct 06, 2012 4:53 pm
Yes it was cold but a good time!
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
-
Colorado75bronc - Official CCB Member
- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: Third Annual Platte River Bar and Grill Meet & Greet
by Kinder » Sun Oct 07, 2012 9:57 am
Had a great time and as always learned something, I'll post up the pics soon.
Best to Date MPG: 26.6
-
Kinder - Official CCB Member
- Posts: 4371
- Images: 0
- Joined: Wed Sep 29, 2010 9:03 pm
- Location: Parker, CO
Re: Third Annual Platte River Bar and Grill Meet & Greet
by Badlands » Sun Oct 07, 2012 12:59 pm
Wish I could have been there. Spent the week end with my grand daughters, which was great. How many folks showed up?
Pics?
Pics?
-
Badlands - Official CCB Member
- Posts: 340
- Joined: Mon Apr 25, 2011 8:02 pm
- Location: Littleton
Re: Third Annual Platte River Bar and Grill Meet & Greet
by Booger » Sun Oct 07, 2012 5:44 pm
I think we had 9 or 10 Broncos not bad with the weather. I didn't get any pics. Not sure who took some.
Bob - Turning hydrocarbons into noise since 1970
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
-
Booger - Official CCB Member
- Posts: 809
- Joined: Thu Dec 23, 2010 5:55 pm
- Location: Broomfield
Re: Third Annual Platte River Bar and Grill Meet & Greet
by hockeydad4-22 » Mon Oct 08, 2012 6:10 am
I took 3...
Which is pretty sad considering...
That F250 was pretty damn sweet with a cummins putting out 600+ hp and over 1200FP torque.
I had a good time, chatting Bronco's, swapping parts, drank some ice tea...
Which is pretty sad considering...
That F250 was pretty damn sweet with a cummins putting out 600+ hp and over 1200FP torque.
I had a good time, chatting Bronco's, swapping parts, drank some ice tea...
[color=#BFFF40]Greg
If you are the smartest person in the room -
You are in the wrong room
If you are the smartest person in the room -
You are in the wrong room
-
hockeydad4-22 - Official CCB Member
- Posts: 2378
- Joined: Tue Nov 02, 2010 12:11 pm
- Location: Highlands Ranch Colorado
Re: Third Annual Platte River Bar and Grill Meet & Greet
by pilosopher » Wed Oct 10, 2012 10:03 pm
sorry I didnt make it...I felt like sheeit (still do) and didnt figure I should be hangin out in the cold, sneezing and coughing.
That is a badass truck! except for the wheels and stacks and that I don't own it.
That is a badass truck! except for the wheels and stacks and that I don't own it.
- pilosopher
- Official CCB Member
- Posts: 39
- Joined: Thu Nov 17, 2011 7:32 am
- Location: Palmer Lake, co
49 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 2 guests