I just did the 4x4x2 box conversion and i used west coast broncos 3/4" adapter plate. Now i can get my line onto the box due to my fitting hitting the frame. Any ideas???

Is my only option to get a power steering hose made that screw straight into the box and not use AN fittings? And hope the clears the frame.

Ive got sone 90 degree fittings you can have

What kind of 90's do you have. Right now I have AN fittings and I thing that part of the problem is I have to use a adapter to go from the box thread to AN

There are low profile 90 degree (non adapter) fittings out there, I think we used them on Willem's Bronco. When he gets home from school I'll look at his setup.

Great thanks.

mine are an -6 for a hydro ram should work

so then does that -6AN 90 you have screw straight into the box making it so I wouldn't have to use the blue adapter shown in the pic?

Let me find them and take a picture. .text me 7209360791

No luck using Willem's setup, he has an adapter. I bet E&H (http://www.emrickandhill.com) can solve the problem locally. Hopefully Trei has a solution.

That looks like what I need! Where did you get that 90?

Now that I look at it again it needs to be inverted flare.

They should work for you. . There free so you haven't lost anything. . My parents live in hr. Text me your info I will have him bring them that way

These will attach to the blue an fittings and swivel anywhere you want .

I will look at Drews tonight, I do not recall having any issues with the lower hose clearance. We are also in HR so you are welcome to swing by and take a look at his set up.

Thanks Trei, I just sent you my info. Is that 90 -AN on both sides? If so then yes that should work great.


Hockeydad- If Trei's fitting doesn't work I'll let you know and maybe I'll come look at Drew's set up.