Transferred some sliders from the 69 to the 76.





Have a tinted back window going in to match the sides soon thx to Hockeydad

Your gonna love those sliders

Got drive shafts rebuilt. Front shaft was the worst one.
They were non maintainable and new shafts are fully maintainable
excited to get them.

Can you get rear AND door glass to match the sliders ?
.

I have thought about it my side glass has hard water stains but maybe get em tinted.[/quote]

Mine are kind of scratched up from felt-free window felts[/quote]

I read you can use a mixture of water and ammonia soaked on newspaper and lay them against the window for 24 hours and it will break up the water stains. Don't think it will work with your scratched up windows ;)[/quote]

Yes I can get glass tint to match the sliders.

Hard water stains... give the afore mentioned ammonia soaked newspaper a try, then get out the rubbing compound and buff them. that is the only thing I have ever seen work.

scratches... if you can feel them with your fingernail, give me a call to replace them. You wont get them out and even if you did you would distort the glass so much it is ruined.

So would I get tinted glass or window tint / film ?

I understand those wing windows are a biotch to remove and replaced

If we're all done ing over Landshark's windows....

I put some feet under the Stroppe. It was a colossal pain in the arse too. Removing the spring perches from the 9" took far longer than I imagined. Once that was done though the 9" flew under the truck.



I had to get a little creative to get the nose up for the 44 install.



Jack stands on top of landscaping timbers and backed up by the engine hoist did the trick.



It ain't pretty but it rolls. And more importantly my trailer is clean again freeing me up to make my delayed trip to MO.

Are those the axles you got yesterday?

well I guess I cant go off the dipstick for trans fluid level. After driving it a few times it is done leaking but the dipstick shows it's low.

In the words of Willi Nelson

On the road again!

Oh yeah, with a new counter weight on the front bumper

That counterweight will come in handy

Well I thought that while waiting for the transfer case to be painted. I started to clean him up under the hood..