|
|
It is currently Fri Nov 01, 2024 4:33 am
|
|
Page 1 of 1
|
[ 11 posts ] |
|
trans tunnel floor support channel
| Author |
Message |
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
 trans tunnel floor support channel I will be removing the NP435 from my 66 and replacing it with the correct 3 speed. I need some floor support channel to replace what was cut out to install the NP435 (top section, most of the driver side & a few inches of the passenger side). If someone is cutting this out of a truck or has a scrap tub with a decent section of channel.
If there was a complete dog house & channel run available, that would be ideal.
JBG lists the item as 66/67 specific, but I don't know what the difference is from the newer trucks. The rough dimensions are the same as my 74's channel, so I think I can use parts from any truck to do my patch.
Thanks
You do not have the required permissions to view the files attached to this post.
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Sat Dec 05, 2015 12:31 pm |
|
|
|
Eck
Official CCB Member
Joined: Thu Oct 25, 2012 9:33 pm
Posts: 2460
|
Re: trans tunnel floor support channel The forward support? I just cut a chunk out of mine. I can measure it if it will work for you.
_________________
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
|
| Sat Dec 05, 2015 3:44 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: trans tunnel floor support channel
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Sat Dec 05, 2015 4:39 pm |
|
|
|
Eck
Official CCB Member
Joined: Thu Oct 25, 2012 9:33 pm
Posts: 2460
|
trans tunnel floor support channel 6 1/8" wide. It's basically just the top section. None of the side piece. Based on you're picture, guessing it isn't enough.
_________________
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
|
| Sat Dec 05, 2015 5:24 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: trans tunnel floor support channel Its not quite enough, but hang onto it please. If I can't find a whole piece, maybe I can splice it together. Nobody's ever going to see it.
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Sat Dec 05, 2015 7:13 pm |
|
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm
Posts: 4901
Images: 0
Location: Colorado Springs
|
Re: trans tunnel floor support channel
_________________
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
| Sat Dec 05, 2015 8:01 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: trans tunnel floor support channel I've got this left over from a recent set of floorboards I did. Yours for the taking. It's pretty close to your drawing. I'd be happy to measure stuff if it'd help.
You do not have the required permissions to view the files attached to this post.
|
| Sat Dec 05, 2015 10:05 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: trans tunnel floor support channel Awesome, that looks about perfect! Thank you.
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Sat Dec 05, 2015 10:08 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: trans tunnel floor support channel Cool, it's yours. When do you need it and what's the best way to get it to you? Happy to ship if that's the plan.
|
| Sat Dec 05, 2015 10:15 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: trans tunnel floor support channel No hurry at all. Plans are to have it off the frame & blasted next summer. So sometime before July or August would be fine. LOL.
The first priority is getting the 74 running.
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Sat Dec 05, 2015 10:31 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: trans tunnel floor support channel Cool. I'll stick it on the shelf. It'll be here when you're ready.
|
| Sat Dec 05, 2015 10:33 pm |
|
|
|
|
|
Page 1 of 1
|
[ 11 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 72 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
