Exhaust manifold

[cravenbronco]

Looking for a stock 289 exhaust manifold was wondering if anyone has one. Figured I'd ask the best club about it. Thanks in advance

[rt9]

I'll check when I get home. What side?

Sent from my SM-N920P using Tapatalk

[TOOLMAN]

I think I have a driver side for a 302 if you don't want to split a set, Rick. I think the 289/302 blocks are pretty much the same (someone feel free to correct me if I'm wrong).

[rt9]

Here's what I have left. I've got a ring and gasket too.

Sent from my SM-N920P using Tapatalk

Toolman, it was my experience that the drivers side depends on year with the 289. There are 2 different output configuration, so it depends on his exhaust setup.

[TOOLMAN]

Thanks for the clarification...my passenger side ended up in two pieces!

[mickphatmac]

I have 1 side off my 289 '68... Can't remember which side I have?
I'll look if you're interested.

[cravenbronco]

Now you got me wondering. I'll look aft r the snow melts off and get a pic or a number of the one I need. Thanks for the info.

[rt9]

The way I remember it, the driver side can exit straight down or back at a 45 degrees angle. When I checked with Bronco Hut, Dana didn't have the one I needed for the Drivers side. It was cracked. So I ended up finding them on Ebay but I had to buy a set.

[rt9]

Saw this today on FB.
https://www.facebook.com/groups/2960553 ... 7339761267

Sent from my SM-N920P using Tapatalk

[cravenbronco]

Mine exits straight down. I might have found one and will go this weekend and see if it matches.

[rt9]

If not Dana at bronco hut probably has my old one. He put my headers on and I just left them there.

Sent from my SM-N920P using Tapatalk

[cravenbronco]

Found a set. Thanks everyone