www.ColoradoClassicBroncos.com
A place for Coloradans to unite with our love of 66-77 Ford Broncos
1967 Bronco Auto Trans
4 posts
• Page 1 of 1
1967 Bronco Auto Trans
by daveott3@aol.com » Wed Mar 28, 2018 1:55 pm
I have a customer that is a member of this forum that has a really nice 67 Bronco, V8, Automatic, lift kit, mostly restored. Unfortunately the 3 speed automatic transmission has a bunch of clutch debris in the pan. We are looking to install a later model 4 speed OD transmission in the vehicle. What do I need to know to do the exchange? Obviously, the transfer case, etc., but what else needs to be obtained or modified for the swap? Thanks!
- daveott3@aol.com
- Posts: 5
- Joined: Wed Mar 28, 2018 1:27 pm
Re: 1967 Bronco Auto Trans
by ZOSO » Wed Mar 28, 2018 2:02 pm
Is this bronco EFI'd or still carb'd?
All depends on what trans you want to run. You can get an AOD out of a mustang and change the tailhousing and output shaft with an adaptor to the d20. But a far superior transmission to use is a 4r70w out of a 96-01 ford explorer. It has better gearing and a much stronger build. They will bolt up directly to the 302 and with a bolt on adaptor it will mate to the d20. The 4r70w will require modifications to the trans cross member and driveshafts. It is also all electronically controlled. So either an aftermarket controller or can be controlled off the factory explorer efi system if so equipped.
Our local trans guru is Viperwolf1. He can hook you up with a bulletproof c4 if needed.
All depends on what trans you want to run. You can get an AOD out of a mustang and change the tailhousing and output shaft with an adaptor to the d20. But a far superior transmission to use is a 4r70w out of a 96-01 ford explorer. It has better gearing and a much stronger build. They will bolt up directly to the 302 and with a bolt on adaptor it will mate to the d20. The 4r70w will require modifications to the trans cross member and driveshafts. It is also all electronically controlled. So either an aftermarket controller or can be controlled off the factory explorer efi system if so equipped.
Our local trans guru is Viperwolf1. He can hook you up with a bulletproof c4 if needed.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
-
ZOSO - Moderator
- Posts: 3908
- Joined: Mon Nov 15, 2010 4:58 pm
- Location: Henderson, Co
Re: 1967 Bronco Auto Trans
by Eck » Wed Mar 28, 2018 2:02 pm
daveott3@aol.com wrote:I have a customer that is a member of this forum that has a really nice 67 Bronco, V8, Automatic, lift kit, mostly restored. Unfortunately the 3 speed automatic transmission has a bunch of clutch debris in the pan. We are looking to install a later model 4 speed OD transmission in the vehicle. What do I need to know to do the exchange? Obviously, the transfer case, etc., but what else needs to be obtained or modified for the swap? Thanks!
Which transmission would help.
Sent from my iPhone using Tapatalk
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
Eck - Official CCB Member
- Posts: 2460
- Joined: Thu Oct 25, 2012 8:33 pm
Re: 1967 Bronco Auto Trans
by daveott3@aol.com » Wed Apr 04, 2018 7:27 pm
It has a Holley 4bbl. Sorry. I didn't have my notifications enabled. I will respond promptly now that I figured it out!
- daveott3@aol.com
- Posts: 5
- Joined: Wed Mar 28, 2018 1:27 pm
4 posts
• Page 1 of 1
Return to General 4x4 Technical
Who is online
Users browsing this forum: No registered users and 0 guests