Author |
Message |
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Pony Boy's '70 Half Cab build thread
Bought this truck on eBay in 2003. Looked wayyyy better than it was in person. Probly shouldn't have rebuilt it. But I have been working on it off and on since. She's finally coming together. Replaced both driver and passenger side floors, door and striker posts, rocker panels, kick panels, inner fenders. Basically everything that ends up with cancer, got replaced. She was bad. Had to get three tetanus shots in the process Specs: 1970 U 14 1/2 half cab. the truck was finished nov 26 1969. 1 day before my 8th birthday!!!!! that was on thanks giving day that year!!!!! 1969 Gran Torino 351W bored and stroked to 408. fitech 600 hp on a Air gap intake, Edelbrock RPM aluminum heads, roller everything, timing gear conversion. ZF5 Manual transmission Advance Adapters ZF to D20 that was rebuilt and powder coated w/twin sticks F&R disc brake conversion ARB ft and rear air locker 4.88 gears New axle shafts front and rear New F&R drive lines power brake conversion Extended SS braided brake lines New SS brake hard lines New fuel line New 29 Gal Sherman tank New Copper 3 pass radiator 37 12.50 17 Kevlars on new slotted wheels New OEM steel tailgate dated 1989 most new parts were ford nos Powder Coated pretty much everything -axle housings -frame -tcase -power steering gear -every nut and bolt -brake calipers -All suspension components -4in body lift -with Audi TT leather suspension seats
You do not have the required permissions to view the files attached to this post.
Last edited by pony boy on Thu Jan 23, 2020 9:42 pm, edited 7 times in total.
|
Fri Nov 11, 2016 10:27 pm |
|
|
Moab Mike
Official CCB Member
Joined: Mon Jan 03, 2011 2:59 pm Posts: 1940 Location: Witness Protection Program
|
Re: Pony Boy's '70 Half Cab build thread
|
Sat Nov 12, 2016 7:58 am |
|
|
cravenbronco
Official CCB Member
Joined: Sat Apr 19, 2014 5:40 pm Posts: 916 Location: Bailey
|
Re: Pony Boy's '70 Half Cab build thread
|
Sat Nov 12, 2016 1:48 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Pony Boy's '70 Half Cab build thread
x3!! And a ZF6? This I gotta see!!!
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Nov 14, 2016 10:26 am |
|
|
EFI Guy
VENDOR
Joined: Sun Dec 15, 2013 8:22 pm Posts: 442 Location: Arvada
|
Re: Pony Boy's '70 Half Cab build thread
X4
|
Wed Nov 14, 2018 2:27 pm |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Pony Boy's '70 Half Cab build thread
Lots of work in this build..........but you had me at 408
Any performance data on it ?
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Thu Nov 15, 2018 1:21 am |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
we are still working though some things . hoping to have it painted if i can stay out of the penalty box (hospital) . got to love that fitech best thing sense big tires. just put in on my 73 and man no misses no gas smell 22 miles to gal when the foot is not in it !!!!!!!!!!!
You do not have the required permissions to view the files attached to this post.
|
Thu Nov 15, 2018 11:21 am |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
here is the paint
You do not have the required permissions to view the files attached to this post.
|
Thu Jan 16, 2020 10:41 pm |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
2017 ford ruby red metallic it whats on the 2017 mustang
|
Thu Jan 16, 2020 10:43 pm |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
hopping to reassemble in the next few mos
|
Thu Jan 16, 2020 10:52 pm |
|
|
mickphatmac
Official CCB Member
Joined: Fri Mar 16, 2012 10:26 am Posts: 1810 Images: 14 Location: Evans,CO
|
Re: Pony Boy's '70 Half Cab build thread
Beautiful color!!! Man that's gonna be NICE!!!
_________________ 1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
|
Fri Jan 17, 2020 8:25 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Pony Boy's '70 Half Cab build thread
That looks amazing!! Looking forward to seeing it in the sunlight!
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Fri Jan 17, 2020 10:50 am |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
in the sun
You do not have the required permissions to view the files attached to this post.
|
Fri Jan 17, 2020 12:22 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Pony Boy's '70 Half Cab build thread
That is a beauty!
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Fri Jan 17, 2020 12:48 pm |
|
|
Strike2
Joined: Mon Nov 28, 2016 11:34 am Posts: 808
|
Re: Pony Boy's '70 Half Cab build thread
Wow very nice color/build cant wait to see it with the half cab on.
|
Fri Jan 17, 2020 1:31 pm |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
got it back from paint!!!!! starting assembly!!!!!
You do not have the required permissions to view the files attached to this post.
|
Fri Feb 07, 2020 8:25 pm |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Pony Boy's '70 Half Cab build thread
Wow, great color scheme
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Sat Feb 08, 2020 10:09 am |
|
|
JGZ
Official CCB Member
Joined: Sat Oct 23, 2010 3:20 pm Posts: 393 Location: Pueblo West
|
Re: Pony Boy's '70 Half Cab build thread
That's looking awesome.If you're looking for a interior trim,headline kit hit me up..
|
Sun Feb 09, 2020 12:23 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Pony Boy's '70 Half Cab build thread
Really nice!!
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Feb 10, 2020 9:01 am |
|
|
Jkolstoe
Official CCB Member
Joined: Thu Nov 07, 2019 7:21 am Posts: 7
|
Re: Pony Boy's '70 Half Cab build thread
Color looks amazing!! Any chance you’d share the contact info of who paint it for you?
Sent from my iPhone using Tapatalk
|
Mon Feb 10, 2020 5:03 pm |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
At this time I would not recommend my painter. if he takes care of some of the issues I have with the paint then I would recommend him. all I can say Is no matter who paints for you . you need to make sure you get it all in Righting !!! what the painters jobs is and how long its gonna take and what your part is in the whole thing . you also need to make sure the painter has the same or higher standers than yourself . BUYER BEWARE !!!!!!!!!! talk to them and make sure they know what you want and what you expect . PAINT IS NOT CHEAP!!!!!!!
|
Wed Feb 19, 2020 10:32 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Pony Boy's '70 Half Cab build thread
Excellent advice! My poor dad has a hand-shake agreement on body work and paint for his old power wagon. Initially the shop said it would take 6 months of "spare time" to get it done. That was nearly 4 years ago and he's just gotten back the cab and bed in Dec. Still waiting on fenders.
You might also outline what penalties there are for not completing on time?
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Wed Feb 19, 2020 11:24 am |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Pony Boy's '70 Half Cab build thread
I hope you can work the details out with your painter.
Small mistakes can cost a lot to redo. I've seen a wide range of what is 'acceptable' to give back to the customer. It's easy to take in the big picture when you pick up the truck, and be impressed until you start looking closely at the details.
If things don't get done to your satisfaction, post up the problems and I'll try to help you understand what it will take to fix them.
Good luck.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Wed Feb 19, 2020 5:39 pm |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
I use to do my own painting!!! the shop I started in had 3 years in a row tri state auto show 1st place wins for paint. my son has a 2 year degree in auto paint. so we know. that's the problem is we know what it supposed to be like . I would have painted but had 2 heart attack in 20019 in june and in oct and wanted to see it done . and what is acceptable by other people is mind blowing . so he'll will fix it or will go to court. I have no choice . thank for the offer to help though.
|
Thu Feb 20, 2020 11:18 am |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
the thing to do is ad a Monterrey penalty in the contract for every week there over . it could be 50.00 or higher every week there over . if there are unseen body work or other thing you could not see in the bidding of the work and they need or want more money go and look at what is going on . go by and see how things are going from time to time. YOU ARE THE BOSS!!!!!!!! if at any time you don't like what see load it up and take it back. and NEVER PAY MORE THAN 1/2 as a down payment . I got a 500.00 discount by paying 1/2 cash down . AND NEVER PAY TILL YOUR HAPPY WITH THE JOB NEVER. POST DATE THE CHECK for 3 days even 1 day . till you can see the truck at you own place . it is over whelming when you 1st see the truck . the best thing for you guys take your wife's if you spent the money I did your wife will be looking at in a way different way than you are hahahahahaha or take some one that can look at with objectivity . and the excitement will make you miss a whole lot .
|
Thu Feb 20, 2020 12:07 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Pony Boy's '70 Half Cab build thread
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Thu Feb 20, 2020 6:32 pm |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
my issues were taken care of by my painter!!!!!!!!! there name is new custom paint in pine Colorado 303 838 6796. did a good job!!!!!!!! give them a call. Harry's is the man!!!!!! Tell em Willie sent you!!!!
|
Fri Mar 06, 2020 11:46 am |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
I can no longer recommend my painter . I ended up suing him and winning in trial yesterday .
|
Tue Feb 02, 2021 2:28 pm |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
im going to sell my 17 year project. we did win 1st place in show at truck fest in june of 2020 the Toyota is is my sons and he won 1st place in rock crawler we shoehorned a 2001 302 out of a ford exploder
You do not have the required permissions to view the files attached to this post.
|
Tue Feb 02, 2021 2:30 pm |
|
|
pony boy
Official CCB Member
Joined: Fri Jun 29, 2012 11:42 am Posts: 54 Location: 9000 ft MT ROSALIE ( BAILEY )
|
Re: Pony Boy's '70 Half Cab build thread
took 2nd place in show this year at bandimere speedways truck fest . was hopping for a 1st place again but 2nd is nice also
You do not have the required permissions to view the files attached to this post.
|
Mon Jul 19, 2021 11:42 pm |
|
|
|