|
|
Register •
FAQ
• Login
|
|
|
It is currently Sun Nov 24, 2024 5:32 pm
|
|
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
BOBS 2 68S
Official CCB Member
Joined: Sun Aug 04, 2013 2:19 pm
Posts: 375
Location: Hudson
|
 Fuel pressure regulator I am changing back to the Edelbrock carb. This time with a fuel pressure regulator. Found that Edelbrock carbs do not like high fuel pressure. Those that are running regulators where did you mount it. I have the Holley adjustable with gage port. I am using a drop base air cleaner so mounting off the carb base will not realy work. I thought about mounting to a inner fender or fire wall but a bit worried about the longer fuel lines.
|
| Thu Jun 22, 2017 5:19 am |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: Fuel pressure regulator I ran one for years mounted on the front of the intake manifold, near the t-stat housing. Mine was a Mallory with a return line to the tanks.
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Thu Jun 22, 2017 6:46 am |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: Fuel pressure regulator as close to the carb as possible.
And yes edelbrocks don't like over 5-5.5psi
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Thu Jun 22, 2017 7:25 am |
|
|
|
Booger
Official CCB Member
Joined: Thu Dec 23, 2010 6:55 pm
Posts: 809
Location: Broomfield
|
Re: Fuel pressure regulator 3 psi is a good wheeling pressure just a bit to low for the road. Mount it as close as you can to carb to minimize vapor lock.
_________________
Bob - Turning hydrocarbons into noise since 1970
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
|
| Thu Jun 22, 2017 9:23 am |
|
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 67 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
