|
It is currently Sun Nov 24, 2024 5:30 pm
|
|
Page 1 of 1
|
[ 21 posts ] |
|
Author |
Message |
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
OMG, it's decision time
As some of you may know, I'm planning a move out of state soon. I have 3 Broncos, a 39 Plymouth 5 window coupe, and 2 modern daily drivers. I have to sell one of my Broncos. Either my 66 or my 72 Explorer Sport. Both are 'rare' and I love both. I can't decide which to keep. I'm posting this thread to get opinions, and also, open the floor to offers. Message me or call me if you are interested in either one. I'll do my best to offer every detail I know about them. I'm going to do my best to list them below, but I'm sure I'll forget something. I'm going to sell one, I don't know which. I could be happy keeping either. Even if you aren't interested in purchasing, tell me which one you would keep & why. This decision will depend on the offers I receive (vs what I've paid) combined with what my gut tells me to do (that seems to change every 2-3 minutes). My early build (October 65) 66. Budd tub. Very little rust, needs drivers floor pan re-replaced. Needs driver's door skin (have a Dynacorn skin), driver's quarter & rocker need work. Hood is the only sheet metal that MAY not be correct. Grill pictured is not on the truck anymore, have a good eyebrow grill that needs body work. Truck should be Caribbean Turquoise, not white. Bench & bulk head were not original, have sold both. Warn winch & front bumper not included. Needs fuel pump, and brakes done. Runs when gas poured into carb, but won't stay running Parts I've accumulated to do a factory correct resto: 66 front buckets & 67 rear bench, both are from Don Allison's yard, need redone. Oil bath air cleaner & all brackets & stickers Very rare sheetmetal driver's air box & repop'd air box to hood seal & cowl seal 2 sets of correct 66 only vac wipers (have spot for helper arm, but no arms) Early 66 3 speed, correct linkage, & shifter arm Extra early 66 t-case 2 correct 66 "long" t-case shifters, 2 shift knobs 5 correct 66/67 steel wheels Correct front & rear bumpers- painted, need straightened - from DA's yard. 66 jack 66 tail light buckets & lenses 66 Dana lock out hubs 66 horn button Correct mirror head (glass mount) Jack mount sticker 1 set 66 seat belts (rough condition) & 1 set of 67 seat belts (very close to correct, better shape than 66 belts), both sets should be rewebbed 1 set factory 66 coil springs Extra steering linkage, radiator, gas pedal Correct tail gate spare mount 20150922_180152.jpg viewtopic.php?f=3&t=8062&hilit=6672 Explorer Sport. One of 141 Candyapple red Explorer Sports, original paint. Unicorn truck. Almost all 72 E/S were Dakota Tan or a copper root beer metallic. Lots of talk of possible red ones & possible blue ones, but very few known. Needs outer rockers, floor pans, door post skins & typical inner fenders replaced. Have deluxe Marti w/ framed window sticker, build info, etc. Have a nice set of hub caps, 4 turn P/S box fresh rebuild, C4, auto column & t-case, decent used wiper cover. Also truck runs when gas poured into carb, but won't stay running. Truck was parked after hunting trip, broke something in the rear diff, need brakes done, M/C empty. 20160524_174207.jpg 72ES Marti.jpg viewtopic.php?f=3&t=8431&hilit=explorerCross posting in Broncos for sale.
You do not have the required permissions to view the files attached to this post.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Tue Jun 20, 2017 8:47 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: OMG, it's decision time
So I'll start.
The 66 is awesome because it's a Budd body, all the super-hard-to-find stuff has been found. Not a great driver, 170 I-6 won't like modern highway speeds. Huge, frame off resto required to make it right.
The 72 is awesome because of the rare color & original paint. More rust repair required, but less overall work to make an awesome driveable, patina truck (stock height or possibly a LUBR). V8 will make a better driver. V8 LUBRs are where the $ is. I'd probably keep it 3 on the tree, but the C4 would be nice & very marketable.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Tue Jun 20, 2017 9:02 pm |
|
|
Eck
Official CCB Member
Joined: Thu Oct 25, 2012 9:33 pm Posts: 2460
|
Re: OMG, it's decision time
My opinion would be to keep the 72 and that would also be the one I'd make you an offer on if I also wanted to get divorced before I even got married. I personally don't have the same infatuation with the '66 original restore stuff so that's how I'm basing my opinion. My .02.
Sent from my iPhone using Tapatalk
_________________ 69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
|
Tue Jun 20, 2017 10:18 pm |
|
|
sykanr0ng
Official CCB Member
Joined: Thu Jan 22, 2015 1:46 am Posts: 405 Location: Greeley, CO
|
Re: OMG, it's decision time
_________________ "You say overkill like it's a bad thing."
|
Wed Jun 21, 2017 9:31 am |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: OMG, it's decision time
sent ya a PM
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Wed Jun 21, 2017 10:08 am |
|
|
D&D72
Official CCB Member
Joined: Sun Sep 11, 2011 10:49 pm Posts: 988 Location: Henderson, Co. Grand Lake, Co
|
Re: OMG, it's decision time
72 would look great sitting next to my other 72 that still isn't on the road. Where you going? Some Great members here bailing on us... WTH??!
_________________ That guy John.... whatta Jerk.
|
Wed Jun 21, 2017 10:36 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: OMG, it's decision time
If I would come across both of these broncos in a for sale lot somewhere, I think I'd also be mostly interested in the '72. When/if I get serious about acquiring a restomod project I am wanting a V8, 3 on the tree uncut rig. With your expertise in body work, what needs replaced is less of a concern.
There are folks in the club who know far more about what's selling and what's not. I hope it doesn't come down to whichever one you can sell.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Wed Jun 21, 2017 3:10 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: OMG, it's decision time
I was brought up around factory correct GTO restos. That is why the weirdness of the 66 was exciting. It has a new home, it appears. You all will approve. He has my same vision for the truck.
Moving to Carson City area soon. Gunnison has run its course, my career is at a unsatisfying dead end. Family, and opportunity is available in NV. After 22 years here, it's time. I was only supposed to be here for a ski season.
Sent from my SM-J320V using Tapatalk
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Wed Jun 21, 2017 3:24 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: OMG, it's decision time
And the Rubicon trail will be in my backyard. CCB roadtrip?
Sent from my SM-J320V using Tapatalk
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Wed Jun 21, 2017 3:29 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: OMG, it's decision time
GTO restos. I guess I don't know how to edit with my new phone. Lol
Sent from my SM-J320V using Tapatalk
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Wed Jun 21, 2017 3:32 pm |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: OMG, it's decision time
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Wed Jun 21, 2017 6:40 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: OMG, it's decision time
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Wed Jun 21, 2017 8:03 pm |
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: OMG, it's decision time
x3. I'd keep the '66 unless you're going to wheel it.
Sent from my SM-N920V using Tapatalk
|
Wed Jun 21, 2017 8:37 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: OMG, it's decision time
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Wed Jun 21, 2017 9:04 pm |
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: OMG, it's decision time
I would be in for the rubicon as well.
_________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
Wed Jun 21, 2017 10:50 pm |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: OMG, it's decision time
bummer the 66 sold. I was going to make an offer.
Sad to see ya leave us Chad but sometimes it's needed.
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Thu Jun 22, 2017 7:27 am |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: OMG, it's decision time
It's definitely time. I've had reasons to leave for 10 years, but also reasons keeping me here. There is really no reason to stay now. It's not an easy place to make it.
I'm still going to hang around the forum, and hopefully catch up with everyone in Moab, and the Rubicon occasionally.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Thu Jun 22, 2017 12:01 pm |
|
|
Digger
Official CCB Member
Joined: Fri Jun 21, 2013 8:53 pm Posts: 1276
|
Re: OMG, it's decision time
_________________ Cummins R2.8 diesel, ZF5, AtlasII, HP44/BB9, ARBs, coiled / linked suspension, 37" KO2s, full cage, bumpers, etc. Build Thread:
Average 23.5 mpg, Best tank: 25.1 mpg
|
Thu Jun 22, 2017 12:41 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: OMG, it's decision time
Thanks, I noticed Virginia City when looking at real estate listings for the area, not far from where I hope to end up.
I'm on Rockcrawler Classifieds on Facebook, and there seems to be a lot of stuff for sale from that area. In fact when I was there this winter, I bought a Lock Rite for my D44 from a guy with a pretty well built FJ. And the real estate agent who showed me around has an old S10 Blazer on 40's. So I'm guessing there are some trails around there.
Almost every house has either a 3 car garage or a shop out back, or both. While browsing real estate listings, I found some 1400 sq ft homes with 3 car garages. Just about what I need.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Thu Jun 22, 2017 5:34 pm |
|
|
Eck
Official CCB Member
Joined: Thu Oct 25, 2012 9:33 pm Posts: 2460
|
Re: OMG, it's decision time
Sounds exciting Chad. I wish you all the luck. You'll be missed but you were out in that Gunni island anyways. Hope we can do better about organizing a club trip to your area in the near future.
Best of luck.
Sent from my iPhone using Tapatalk
_________________ 69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
|
Thu Jun 22, 2017 10:36 pm |
|
|
D&D72
Official CCB Member
Joined: Sun Sep 11, 2011 10:49 pm Posts: 988 Location: Henderson, Co. Grand Lake, Co
|
Re: OMG, it's decision time
Talk to me if you don't want to haul that pool table!
_________________ That guy John.... whatta Jerk.
|
Sat Jun 24, 2017 2:20 am |
|
|
|
|
Page 1 of 1
|
[ 21 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 73 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|