I am going to build my own to mimic one I had in a CJ7 years ago...............I think we used 3/16 plate..........ain't no screw driver gonna get in there
| www.ColoradoClassicBroncos.com https://coloradoclassicbroncos.com/ |
|
| Need a console https://coloradoclassicbroncos.com/viewtopic.php?f=4&t=1457 |
Page 1 of 2 |
| Author: | Raptoracer24 [ Tue Apr 12, 2011 10:09 pm ] |
| Post subject: | Need a console |
About time to get everything powdercoated and put the soft top on so I need a console so I can at least leave a few things locked up. I know there is the Tuffy one and airbur has one that I looked at not sure what kind. For those that have the Tuffy, is it worth the $250? If anybody has any other console I'm completely open to anything. |
|
| Author: | Justin [ Tue Apr 12, 2011 10:23 pm ] |
| Post subject: | Re: Need a console |
Smittybilt makes one that is carried by 4wheel parts. I think it runs about $90 and is reasonably close to the Tuffy one. I doubt it is as good, but I'm not sure I'll be able to rationalize paying 2 1/2 times as much for the Tuffy. |
|
| Author: | Entourage [ Tue Apr 12, 2011 10:43 pm ] |
| Post subject: | Re: Need a console |
I am still debating over console or a path to the rear seats. I like the Smittybilt for lots of reasons. It is avaialble with a locking stereo slot or without for about $10.00 Less. The cup holders appear to be nice. I will watch and see what you decide. AIrbur's is nice and a great option - I think it has rear cup holders too. |
|
| Author: | airbur [ Wed Apr 13, 2011 5:43 am ] |
| Post subject: | Re: Need a console |
Hey Chandlar...this is the one I have: http://www.amazon.com/Rugged-Ridge-1310 ... sbs_auto_4 I looked at all the others and while I really like the SmittyBilt and Tuffy, I went with this one because the padding comes forward enough to actually be used as an arm rest, and also because it had the cup holders in the back for my boy's stuff. I really like the material it's covered with as well....we have already stepped on it many times getting into the rear and it's holding up nicely. I don't think you can go wrong with any of the 3 brands above....it's really personal preference. |
|
| Author: | BNC04 [ Wed Apr 13, 2011 5:57 am ] |
| Post subject: | Re: Need a console |
| Author: | airbur [ Wed Apr 13, 2011 6:00 am ] |
| Post subject: | Re: Need a console |
Here you go..... |
|
| Author: | BNC04 [ Wed Apr 13, 2011 6:03 am ] |
| Post subject: | Re: Need a console |
Thanks... Click.. Added to wish list ! Thats a very nice looking interior!!!!! Brett |
|
| Author: | BFD305 [ Wed Apr 13, 2011 8:10 am ] |
| Post subject: | Re: Need a console |
We have the smitty console. It works great and seems real secure. The one problem we saw was to scoot it forward you need to use a bracket that it comes with on the back and that puts it too high. We cut the cup holder portion off then reattached it so it is up on the trannie hump anf the rest is still low on the floor. Works great and can't even tell we altered it. I like the loooks of airbur's, but reading the description I think it is wood and plastic, not as secure for the stereo. |
|
| Author: | dsmith01 [ Wed Apr 13, 2011 12:52 pm ] |
| Post subject: | Re: Need a console |
I have a Tuffy but only because it came with the Bronco. A buddy has had one in his CJ5 for about 8yrs. They make great products but I'd be looking at other options too if it were me. Just too spendy. |
|
| Author: | airbur [ Wed Apr 13, 2011 12:58 pm ] |
| Post subject: | Re: Need a console |
If someone wants to get into a center console, I don't think it matters if it's wood or metal.....2 seconds with a pry bar and "pop" it's open. |
|
| Author: | akaFrankCastle [ Wed Apr 13, 2011 1:05 pm ] |
| Post subject: | Re: Need a console |
| Author: | Moab Mike [ Wed Apr 13, 2011 3:42 pm ] |
| Post subject: | Re: Need a console |
| Author: | Raptoracer24 [ Wed Apr 13, 2011 4:31 pm ] |
| Post subject: | Re: Need a console |
I really like Eric's but the only thing is it doesn't have a stereo compartment. That's why I like the Tuffy but the only issue with the Tuffy is the pad seems too far back on the console that has the locking stereo compartment. The Smittybilt looks good but on their website and on 4wheelparts but it doesn't have a Bronco option? |
|
| Author: | goldenboy_cp [ Wed Apr 13, 2011 4:44 pm ] |
| Post subject: | Re: Need a console |
i got a 1991 ford explorer center console. i went to harbor freight and got there lock set for tool box seams to work ok.... i bought it at a pick n pull they got here in springs for 10 bucks all center console are 10 dollars they got over 800 cars im sure any will work, this is just for something in the back though with my bucket seats my front will be special if you go on my albumn you can see my locking one i will be getting theres pictures there or go to this link http://motormogul.com/product/Command-C ... 66-77.html |
|
| Author: | Entourage [ Thu Apr 14, 2011 8:46 am ] |
| Post subject: | Re: Need a console |
The Command Center looks awesome. Looks like BC Broncos carries it for $350.00. The console bar has been raised. |
|
| Author: | Justin [ Thu Apr 14, 2011 9:33 am ] |
| Post subject: | Re: Need a console |
I hadn't thought of adding a 12v outlet to the console. That makes an absurd amount of sense since I'll be running power to the stereo anyway. I'm planning to but a Smittybilt, may have to mod it. |
|
| Author: | Rox Crusher [ Thu Apr 14, 2011 7:01 pm ] |
| Post subject: | Re: Need a console |
I am going to build my own to mimic one I had in a CJ7 years ago...............I think we used 3/16 plate..........ain't no screw driver gonna get in there
|
|
| Author: | goldenboy_cp [ Thu Apr 14, 2011 8:38 pm ] |
| Post subject: | Re: Need a console |
this is my center consol from ford explorer 1991 |
|
| Author: | Raptoracer24 [ Fri Apr 15, 2011 11:42 pm ] |
| Post subject: | Re: Need a console |
I ordered my Tuffy last night. Just decided to be safe and got the one without the stereo mount. |
|
| Author: | rtreads [ Sat Apr 16, 2011 8:46 am ] |
| Post subject: | Re: Need a console |
| Author: | Cortez [ Sat Apr 16, 2011 4:58 pm ] |
| Post subject: | Re: Need a console |
I like to shop at the pull and pay - mine was $25 and with a fresh coat of paint looks good. Just missing cup holders so I may have to go back for another shopping trip...I like the explorer one. |
|
| Author: | goldenboy_cp [ Sat Apr 16, 2011 6:50 pm ] |
| Post subject: | Re: Need a console |
cortez, what is your center console one of these days the stars will align and i will go to the breakfast , definitly if it is in south in colorado springs, just leaving for week so ill miss it, but next month it my birthday so who knows playing by yr |
|
| Author: | Cortez [ Sat Apr 16, 2011 7:24 pm ] |
| Post subject: | Re: Need a console |
Mine's out of a minivan, but can't recall the exact model. I think it was a Ford or Dodge. I missed today's breakfast...had my gall bladder removed two days ago so I've been layin low. Can't wait to get back on the project, I'm midway through addition of my auxiliary tank. |
|
| Author: | airbur [ Sun Apr 17, 2011 6:43 am ] |
| Post subject: | Re: Need a console |
| Author: | Entourage [ Sun Apr 17, 2011 11:18 am ] |
| Post subject: | Re: Need a console |
Congrats raptor - I think that is the route I will goas well. |
|
| Author: | Raptoracer24 [ Sun Apr 17, 2011 8:24 pm ] |
| Post subject: | Re: Need a console |
Will do for sure. |
|
| Author: | Jesus_man [ Mon Apr 18, 2011 1:35 pm ] |
| Post subject: | Re: Need a console |
On the cheap:  J.D. |
|
| Author: | Raptoracer24 [ Mon Apr 18, 2011 4:58 pm ] |
| Post subject: | Re: Need a console |
Ahhh now you give me the best one of all! |
|
| Author: | Jesus_man [ Tue Apr 19, 2011 8:49 am ] |
| Post subject: | Re: Need a console |
| Author: | akaFrankCastle [ Tue Apr 19, 2011 10:17 am ] |
| Post subject: | Re: Need a console |
Very easy to lock. Simply weld the hoop side of a lock hasp to the can, under the handle, so the hoop protrudes through the circular opening on the handle. We do it all the time. Of course, you'll need to use a pad lock to secure it. For max security, I'd recommend an American series 200. Nearly impossible to pick or bypass and a hardened shackle making bolt cutter use pretty damn tough. We usually just use the grinder to cut them off. |
|
| Page 1 of 2 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|