| www.ColoradoClassicBroncos.com https://coloradoclassicbroncos.com/ |
|
| Bronco problem https://coloradoclassicbroncos.com/viewtopic.php?f=4&t=3927 |
Page 1 of 1 |
| Author: | landshark [ Fri Apr 20, 2012 1:38 pm ] |
| Post subject: | Bronco problem |
I'm having a bit of an issue with fine tuning my fullsize suspension and need a hand in determining some slop i have. The steering has always been a bit vague however there is something that is worn out or just a bit off it seems. Its tough to do allot of the trouble shooting myself as checking ball joints and steering components really requires two people and a level suface - I have neither right now. Would someone be willing to donate their time and allow me to come over to do a bit of diagnosing after the breakfast tomorrow? Probably require a jack and two stands, which I can bring if need be.. dont want to wrench on it or anything just nail down the culprit so I can fix it. Would be more than willing to buy lunch or a couple of your favorite canned beverages, but just two ;) |
|
| Author: | Booger [ Fri Apr 20, 2012 6:26 pm ] |
| Post subject: | Re: Bronco problem |
Chris if you wanted to drive up here you would be more than welcome to borrow my stuff but it's on the opposite side of town. |
|
| Author: | landshark [ Fri Apr 20, 2012 6:35 pm ] |
| Post subject: | Bronco problem |
I need a hand if possible as well as long as your not in the springs I'm ok driving over. If your at the breakfast I can talk to you there I jus need to trouble shoot this it's driving me crazy! |
|
| Author: | Booger [ Fri Apr 20, 2012 6:45 pm ] |
| Post subject: | Re: Bronco problem |
Probably won't be at the breakfast. I am trying to get the garage picked through so I can put the Mustang in and remove the headers and install the stock exhaust on it. Damn emission crap. I'll pm you my cell # as I don't think it's in the member list for directions. Located up off 136th and I25, couple miles west. |
|
| Author: | Kinder [ Fri Apr 20, 2012 7:00 pm ] |
| Post subject: | Bronco problem |
Chris, I'm avail as well, close to the bfast spot is that is easier. Bonus is I can give u the cash I owe ya. |
|
| Author: | landshark [ Fri Apr 20, 2012 7:09 pm ] |
| Post subject: | Bronco problem |
That would be great. Talk to u at the breakfast. |
|
| Author: | landshark [ Tue Apr 24, 2012 8:13 pm ] |
| Post subject: | Bronco problem |
Thanks for the help kinder, picked up a set of spicer ball joints and 2 sets of one ton tre's and will install them this week ;) Thanks again for the offer booger kinder was a bit closer! |
|
| Author: | crawlercreations [ Tue Apr 24, 2012 8:16 pm ] |
| Post subject: | Re: Bronco problem |
| Author: | landshark [ Wed Apr 25, 2012 1:49 am ] |
| Post subject: | Bronco problem |
Thanks one of the few specialty tools I do have ;) |
|
| Author: | Booger [ Wed Apr 25, 2012 3:38 am ] |
| Post subject: | Re: Bronco problem |
Not a problem Chris. I figured that Kinder was closer so that's an easy choice. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|