Tough to see in these pics..
| www.ColoradoClassicBroncos.com https://coloradoclassicbroncos.com/ |
|
| Aluminum fabricators https://coloradoclassicbroncos.com/viewtopic.php?f=4&t=7434 |
Page 1 of 1 |
| Author: | TOOLMAN [ Mon Apr 20, 2015 1:33 pm ] |
| Post subject: | Aluminum fabricators |
Anyone have a good referral for a aluminum fabricator around town? I'm having interference problems with the fan/shroud thanks to my 1" body lift and need some fabrication done to basically move the opening down 1". |
|
| Author: | Dirtheadz [ Mon Apr 20, 2015 2:51 pm ] |
| Post subject: | Re: Aluminum fabricators |
can you just cut the bottom to clear? Most shrouds only cover half the fan anyways. Just my $.02 |
|
| Author: | TOOLMAN [ Mon Apr 20, 2015 3:02 pm ] |
| Post subject: | Re: Aluminum fabricators |
| Author: | Eck [ Mon Apr 20, 2015 3:03 pm ] |
| Post subject: | Re: Aluminum fabricators |
Option 4- move the radiator mounts down an inch to make up for the 1" BL. |
|
| Author: | JGZ [ Mon Apr 20, 2015 4:11 pm ] |
| Post subject: | Re: Aluminum fabricators |
If you want something fabed out of aluminum call this guy.Mike at Black Top Hobbies.303-941-1428 No b.s.this guy reasonable and top notch. |
|
| Author: | Jesus_man [ Mon Apr 20, 2015 11:34 pm ] |
| Post subject: | Re: Aluminum fabricators |
Probably cleanest to move our mounts on the shroud. I'd lean that way too. Let us know what you end up with. |
|
| Author: | TOOLMAN [ Tue Apr 21, 2015 8:17 am ] |
| Post subject: | Re: Aluminum fabricators |
| Author: | Eck [ Tue Apr 21, 2015 8:24 am ] |
| Post subject: | Re: Aluminum fabricators |
I moved the radiator mounts on mine which lowered both the radiator and fan shroud so there wasn't any fab needed to the actual shroud. Let me know if you need some help and would like to use my welder. I can probably squeeze some time in Friday or Saturday. |
|
| Author: | JGZ [ Tue Apr 21, 2015 9:22 am ] |
| Post subject: | Re: Aluminum fabricators |
Mike @Black Top Hobbies is a hellava fabricator.He works after hours so this might work out better for you if you have a 9to 5.Dose some awesome cages and chassis work for the drag race crowd. |
|
| Author: | TOOLMAN [ Tue Apr 21, 2015 10:39 am ] |
| Post subject: | Re: Aluminum fabricators |
| Author: | landshark [ Tue Apr 21, 2015 10:43 am ] |
| Post subject: | Re: Aluminum fabricators |
I added two aluminum strips top and bottom on mine to lower the fan shroud on my 76. Machine bolts holding it together. No way I was going to cut the original mounts. However I'm using the original shroud with the hybrid aluminum extension and not an all new shroud. If I had an all aluminum shroud I would have the extensions tig welded. |
|
| Author: | TOOLMAN [ Tue Apr 21, 2015 11:51 am ] |
| Post subject: | Re: Aluminum fabricators |
| Author: | landshark [ Tue Apr 21, 2015 1:25 pm ] |
| Post subject: | Re: Aluminum fabricators |
Tough to see in these pics..
|
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|