| www.ColoradoClassicBroncos.com https://coloradoclassicbroncos.com/ |
|
| Death wobble https://coloradoclassicbroncos.com/viewtopic.php?f=4&t=8864 |
Page 1 of 1 |
| Author: | cravenbronco [ Sat Feb 18, 2017 1:58 pm ] |
| Post subject: | Death wobble |
It just started today. Was going slower speeds like 10 20 mph when the whole Bronco started to shake really bad to the point of almost having to come to a full stop be for it would quit. Would king pins cause this problem or should I be looking elsewhere? |
|
| Author: | Viperwolf1 [ Sat Feb 18, 2017 1:59 pm ] |
| Post subject: | Re: Death wobble |
Or ball joints (if d44) or trackbar bushings. |
|
| Author: | horseplay [ Sat Feb 18, 2017 4:41 pm ] |
| Post subject: | Re: Death wobble |
Which truck Matt big blue or the half cab two different set UPS |
|
| Author: | cravenbronco [ Sat Feb 18, 2017 8:32 pm ] |
| Post subject: | Re: Death wobble |
| Author: | Digger [ Sat Feb 18, 2017 10:23 pm ] |
| Post subject: | Re: Death wobble |
I would check the trackbar first. |
|
| Author: | Eck [ Sat Feb 18, 2017 10:45 pm ] |
| Post subject: | Re: Death wobble |
I'd start be replacing all the front end bushings including the c bushings. An afternoon of work and not too expensive! Sent from my iPhone using Tapatalk |
|
| Author: | Justin [ Sun Feb 19, 2017 12:15 am ] |
| Post subject: | Re: Death wobble |
x3 or whatever on the track bar bushings. If that doesn't do it, I'd go through the rest of the bushings in the front end. |
|
| Author: | rt9 [ Sun Feb 19, 2017 7:43 am ] |
| Post subject: | Re: Death wobble |
X4, this solved the problem on mine. Sent from my SM-G860P using Tapatalk |
|
| Author: | horseplay [ Sun Feb 19, 2017 10:47 am ] |
| Post subject: | Re: Death wobble |
Hey Matt because your swapping in the D44 I wouldn't get to busy unless it's just the track rod bushings. |
|
| Author: | cravenbronco [ Sun Feb 19, 2017 1:27 pm ] |
| Post subject: | Re: Death wobble |
| Author: | Jesus_man [ Mon Feb 20, 2017 9:23 pm ] |
| Post subject: | Re: Death wobble |
Have someone steer the wheel back and forth from say 10 o'clock to 2 while you start looking for play from track-bar all the way to the steering box. |
|
| Author: | cravenbronco [ Tue Feb 21, 2017 6:20 pm ] |
| Post subject: | Re: Death wobble |
Thanks again for the input it sure helps out. My findings: I had someone move the steering wheel and found that both of my tie rod ends were way loose once I tightened them up the cotter pins didn't even touch the castle nut so I added some washers and now it's good to go. I also had boots ripped so those got replaced. Greased and once again it's a happy truck. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|