|
It is currently Sun Nov 24, 2024 4:52 pm
|
|
Page 1 of 1
|
[ 23 posts ] |
|
Author |
Message |
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Motor keeps dying on me
Ok, it used to be very infrequently (say once a month or so) but has happened three times today already It seems to be an electrical issue as it dies without any stumble or advance warning. Doesn't seem to matter if engine is cold or hot. I can it in neutral, fire it right back up first attempt, it back in gear and go. I haven't tested a darn thing so I am hoping that a guru or two will tell me what the most likely cause is so I can replace the part before Saturday.
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Wed Sep 28, 2011 2:59 pm |
|
|
sbolt19
Official CCB Member
Joined: Wed Oct 06, 2010 10:04 am Posts: 740 Images: 0
|
Re: Motor keeps dying on me
Have you looked at the power wire on the ignition? If it's loose in any way it can do that. You are still carb'd right? What about looking in the dizzy to see if the condenser wire is still screwed down. Push the coil wire back on nice & tight on both the coil & distributor cap. Check the connections on the ground cable on your battery. Make sure that both battery cables are in good shape. Try those.
|
Wed Sep 28, 2011 3:36 pm |
|
|
Viperwolf1
|
Re: Motor keeps dying on me
Does anything else die (radio, gauges, etc) when the engine quits? If not it wouldn't be a battery cable or ignition switch problem.
|
Wed Sep 28, 2011 3:41 pm |
|
|
Shawns Fords
Official CCB Member
Joined: Sat Oct 02, 2010 7:36 pm Posts: 779 Images: 0
|
Re: Motor keeps dying on me
What type of ignition system is in it? Does it have an electric fuel pump? Does it get more frequent when it is hot outside or cooler? I would check all connections as previously stated before going any further.
|
Wed Sep 28, 2011 3:55 pm |
|
|
Viperwolf1
|
Re: Motor keeps dying on me
|
Wed Sep 28, 2011 3:58 pm |
|
|
Viperwolf1
|
Re: Motor keeps dying on me
Checkout the ignition harness connectors. It's common for them to crack.
You do not have the required permissions to view the files attached to this post.
|
Wed Sep 28, 2011 4:26 pm |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Motor keeps dying on me
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Wed Sep 28, 2011 4:31 pm |
|
|
Moab Mike
Official CCB Member
Joined: Mon Jan 03, 2011 2:59 pm Posts: 1940 Location: Witness Protection Program
|
Re: Motor keeps dying on me
It's your rig telling you to put that damn EFI in
|
Wed Sep 28, 2011 5:18 pm |
|
|
Shawns Fords
Official CCB Member
Joined: Sat Oct 02, 2010 7:36 pm Posts: 779 Images: 0
|
Re: Motor keeps dying on me
|
Wed Sep 28, 2011 5:49 pm |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Motor keeps dying on me
I'd check all the conections on the ignition switch. And all the connections on the duraspark system. My bronco just up and quit one day and what the issue was actually too much dialectric grease in one of the connectors.
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Wed Sep 28, 2011 6:04 pm |
|
|
Shawns Fords
Official CCB Member
Joined: Sat Oct 02, 2010 7:36 pm Posts: 779 Images: 0
|
Re: Motor keeps dying on me
Check your rubber fuel lines for any leaks, if it is sucking air in through a line you wont even see a leak, but it sucks in air when driving, dies then will restart once stopped. Just another thing to check.
|
Wed Sep 28, 2011 8:03 pm |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Motor keeps dying on me
Please keep the suggestions coming...........
Given that I have been fooling around under the dash installing CB radio, upgrading wiper switch, and cig lighter......I am thinking the ignition switch wiring could be the culprit.
I checked the connections and they are all tight but maybe a fragile wire is giving up the ghost.
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Wed Sep 28, 2011 8:41 pm |
|
|
Moab Mike
Official CCB Member
Joined: Mon Jan 03, 2011 2:59 pm Posts: 1940 Location: Witness Protection Program
|
Re: Motor keeps dying on me
|
Wed Sep 28, 2011 8:53 pm |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Motor keeps dying on me
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Wed Sep 28, 2011 8:56 pm |
|
|
Viperwolf1
|
Re: Motor keeps dying on me
The pdf I posted above will give you some things to check out.
|
Wed Sep 28, 2011 9:08 pm |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Motor keeps dying on me
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Wed Sep 28, 2011 9:32 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Motor keeps dying on me
Check your plug wires too, make sure they aren't grounding out against your headers or something. That's a shot in the dark as it seems you are pretty well handled, but easy to check.
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Thu Sep 29, 2011 8:17 am |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Motor keeps dying on me
UPDATE: I haven't had time to do any testing of the wiring, etc other than to ensure that wiring connections are tight. Happened again this morning when I left the house.........was only going 10 - 15 mph, engine cold (but running smooth as always), and it died. This time I didn't it in nuetral or try to restart. I looked to make sure the dash lights and heater fan were working and suddenly it fired back up on it's own. It was 1 - 2 seconds max between dying and restarting. Any more ideas with this new information ?
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Fri Sep 30, 2011 7:01 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Motor keeps dying on me
Really sounds electrical. Got to be ignition related.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Fri Sep 30, 2011 11:08 am |
|
|
sbolt19
Official CCB Member
Joined: Wed Oct 06, 2010 10:04 am Posts: 740 Images: 0
|
Re: Motor keeps dying on me
My first thought is ignition related too. I'm gonna think out loud for a few so bear with me..... What about the starter solenoid? Have you ever replaced that? If a coil goes bad (I've never had one go out) it won't keep firing up, but if the starter solenoid goes out, sometimes it will cut in and out. A rap on it with a screwdriver handle sometimes takes care of it. I would say it has to be a loose wire somewhere. Check both the + & - wires on the coil to be sure the connection is good. It has been so long since I have had electrical issues, I forget what to look for and where to start
|
Fri Sep 30, 2011 11:15 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Motor keeps dying on me
Good news is that with a carb motor, there isn't nearly as much to track down and trace.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Fri Sep 30, 2011 11:22 am |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Motor keeps dying on me
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Fri Sep 30, 2011 12:18 pm |
|
|
dans69bronco
Official CCB Member
Joined: Tue Sep 06, 2011 10:15 am Posts: 8 Location: CAHONE, CO.
|
Re: Motor keeps dying on me
just a thought i don't know if you have thought of it but i once had someone put some trash in fuel tank it would run fine tell the piece of hard plastic would suck down over outlet motor would die i would turn key off to restart it would float up and would start right back up took me almost a year to figure that one out. good luck!
|
Fri Sep 30, 2011 2:37 pm |
|
|
|
|
Page 1 of 1
|
[ 23 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 16 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|