|
It is currently Sun Nov 24, 2024 3:14 pm
|
|
Page 1 of 1
|
[ 12 posts ] |
|
New interior rear quarters.
Author |
Message |
B.O.B.
Official CCB Member
Joined: Thu Nov 11, 2010 10:31 am Posts: 770
|
New interior rear quarters.
So I made some new interior rear quarters. It’s out of wood and I am looking to make them last awhile. I would also like to cover them with some kind of carpet. What would work well and not fade? Plus where would be a good place to purchase? Figure some kind of water craft upholstery or something. Plus how should I treat the wood if at all.
Thx Bobby
_________________ 71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
|
Wed Aug 05, 2020 2:47 pm |
|
|
Eck
Official CCB Member
Joined: Thu Oct 25, 2012 9:33 pm Posts: 2460
|
Re: New interior rear quarters.
I sprayed mine with Raptor liner to match my interior. I’d guess that you could paint them with exterior paint to protect the wood and then find some sort of outdoor carpet that is fade resistant like Sunbrella brand.
Sent from my iPhone using Tapatalk
_________________ 69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
|
Wed Aug 05, 2020 3:44 pm |
|
|
mickphatmac
Official CCB Member
Joined: Fri Mar 16, 2012 10:26 am Posts: 1810 Images: 14 Location: Evans,CO
|
Re: New interior rear quarters.
The Wood will look amazing, but I suggest a solid color for your carpet!
You do not have the required permissions to view the files attached to this post.
_________________ 1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
|
Wed Aug 05, 2020 8:32 pm |
|
|
Strike2
Joined: Mon Nov 28, 2016 11:34 am Posts: 808
|
Re: New interior rear quarters.
I'm in the process of making a headliner for the safari top, Joann's fabric store had some boat material check out there web site or call for colors available. I wasn't planning of protecting the wood but now that you said that I'm probably going to use a quart oil base rustoleum from HD on the back side.
|
Thu Aug 06, 2020 7:09 am |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: New interior rear quarters.
You do not have the required permissions to view the files attached to this post.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Fri Aug 07, 2020 8:34 am |
|
|
mickphatmac
Official CCB Member
Joined: Fri Mar 16, 2012 10:26 am Posts: 1810 Images: 14 Location: Evans,CO
|
Re: New interior rear quarters.
20160524_174226.jpg I prefer retro[/quote] Gunni that looks Great!!! If you ever want to get rid of that Red ‘72 ExSp lemme know!!
_________________ 1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
|
Fri Aug 07, 2020 12:04 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: New interior rear quarters.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Fri Aug 07, 2020 2:56 pm |
|
|
BroncoRaider
Official CCB Member
Joined: Thu Oct 22, 2015 11:47 am Posts: 531 Location: Stapleton
|
Re: New interior rear quarters.
I believe I will fight Mike for the red plaid carpet.
_________________ “Buddy” - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint...
|
Fri Aug 07, 2020 3:07 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: New interior rear quarters.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Fri Aug 07, 2020 5:23 pm |
|
|
mickphatmac
Official CCB Member
Joined: Fri Mar 16, 2012 10:26 am Posts: 1810 Images: 14 Location: Evans,CO
|
Re: New interior rear quarters.
You do not have the required permissions to view the files attached to this post.
_________________ 1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
|
Fri Aug 07, 2020 10:22 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: New interior rear quarters.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Fri Aug 07, 2020 11:10 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: New interior rear quarters.
I think you are smart in treating the wood prior to installation. Any good deck treatment should work I would think. A few coats wouldn't hurt.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Aug 10, 2020 11:01 am |
|
|
|
|
Page 1 of 1
|
[ 12 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|