|
It is currently Fri Nov 22, 2024 1:17 am |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 6 posts ] |
| Previous topic | Next topic |
Another A9L/A9P
| Author | Message |
|---|---|
|
Joined: Tue Jan 03, 2012 12:01 pm Posts: 8 Location: Nathrop, CO 
|
 Another A9L/A9PHi Gang,
I have finished up my 5.0 conversion on my old school Ranger. I was not able to get it started as it appears the EBay A9M I bought had the typical 3 capacitors shot (fuel pump just runs on). I opened it up and sure enough one of the legs on two of them were broke. Sent it to a crap ass company SIA Electronics and they have had it for 3 weeks. As a result I asked them to just ship it back. I now need to find some kind of replacement. These units are getting hard to find and when you do you never know what you get. I do not need a high HP setup, I just want it to run. I used a painless harness and an Explorer 5.0 with a TFI distributor. I have heard some crown Vic ECU’s would work with a change in fire order? Any suggestions? You do not have the required permissions to view the files attached to this post. |
| Sat Jan 15, 2022 9:43 am |
|
|
|
|
Official CCB Member   Joined: Sun Apr 14, 2013 5:00 pm Posts: 306 Location: Greeley, CO
|
Re: Another A9L/A9P I have an A9P that EFI guy went through and was never used. Was going to put it up for sale but it hasn’t been a priority if you’re interested.
Sent from my iPhone using Tapatalk _________________ 73 Ranger (Holy Crap, replacing the door post is so much fun!) |
| Sat Jan 15, 2022 10:23 am |
|
|
|
|
Joined: Tue Jan 03, 2012 12:01 pm Posts: 8 Location: Nathrop, CO
|
Re: Another A9L/A9P Hi, I sent a PM.
|
| Sat Jan 15, 2022 10:39 am |
|
|
|
|
Official CCB Member  Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Another A9L/A9P Get the ECU you have to Garry/EFI Guy. If it can be fixed, he can do it.
I'd also grab an extra for backup. I got lucky and ended up with 2. _________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141) |
| Sat Jan 15, 2022 4:10 pm |
|
|
|
|
Joined: Tue Jan 03, 2012 12:01 pm Posts: 8 Location: Nathrop, CO
|
Re: Another A9L/A9P Sounds good. I will plan on getting with EFIguy once and if I get mine back. I was thinking today, its probably a good idea to have another just in case. Seems these are pretty hard to come by. Thanks to Kevin for getting his to me lickity split. I appreciate all of the advise.
|
| Sat Jan 15, 2022 5:41 pm |
|
|
|
|
Official CCB Member  Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Another A9L/A9P Looks like a clean ranger! I have been worried about my computer as it's pretty well exposed and I don't have a backup either. It'd be interesting to know if there are alternatives.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Mon Jan 24, 2022 9:24 am |
|
|
|
|
|
Page 1 of 1 |
[ 6 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 13 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |