|
It is currently Sun Nov 24, 2024 5:00 pm
|
|
Page 1 of 1
|
[ 20 posts ] |
|
Author |
Message |
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Fluid Storage containers
As many of you do, I carry a stash of fluids with me in the bronco everywhere I go. They are all stored in an ammo can. I carry 1 gal of gear oil, 1 gal of 50/50 antifreeze a few quarts of motor oil, power steering fluid, brake fluid, etc.
My issue is that twice now, I have had the plastic jugs fail and leak inside the ammo can. And being the sealed container the can is, I don't notice until I get back in there for something. I have had one gear oil and one antifreeze bottle split on me. Are there cheap metal or at least more beefy plastic containers I can store these liquids in that would handle trail abuse? Ideally, they would be about the same size of the original containers so that they will still fit nicely in my ammo can. Filling my spare electrical components with oil or antifreeze can't be good on them and can make them useless as spares.
Any ideas?
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Wed Sep 21, 2011 1:42 pm |
|
|
Viperwolf1
|
Re: Fluid Storage containers
I've seen some tupperware-like kitchen containers that work well. Rummage through the cupboards and see what you can find.
|
Wed Sep 21, 2011 3:12 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fluid Storage containers
You tryin' to get me killed? LOL
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Wed Sep 21, 2011 3:14 pm |
|
|
rtreads
Official CCB Member
Joined: Sun Jan 02, 2011 9:37 pm Posts: 320
|
Re: Fluid Storage containers
I use old rectangular juice bottles. They wedge between the cage and the inside of the rear quarter really well!
|
Wed Sep 21, 2011 8:08 pm |
|
|
69bronco
Official CCB Member
Joined: Sun Dec 26, 2010 12:26 am Posts: 20 Images: 9 Location: Aurora
|
Re: Fluid Storage containers
Get ya some foam or the like to jam in the can and take up the extra space so they don't move around.
|
Wed Sep 21, 2011 9:12 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fluid Storage containers
rtreads, you have a picture of what you are talking about?
69Bronco - That is something to try as well. If even to simply cushion them a bit. Will have to be somewhat dense as those bottle are fairly heavy for the footprint they have.
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Thu Sep 22, 2011 8:10 am |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Fluid Storage containers
The best fluid container can be had at Costco.
Get the twin pac gallon sized apple juice.
It is a really thick see through bottle with a built in handle and a nice threaded cap.
I haven't found a better one yet.
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Thu Sep 22, 2011 11:34 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fluid Storage containers
I like apple juice!! LOL! I think I know what you're talking about. Do they seal well after opened? IIRC they seem to have a similar footprint to the gallon oil jugs too, allowing them to fit in my ammo can.
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Thu Sep 22, 2011 11:38 am |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Fluid Storage containers
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Thu Sep 22, 2011 11:41 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fluid Storage containers
This is what I am trying to replace: Both antifreeze and oil are the same bottle. Also carry and empty one of these to get the oil into the diffs:
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Thu Sep 22, 2011 11:51 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fluid Storage containers
This?
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Thu Sep 22, 2011 11:52 am |
|
|
Viperwolf1
|
Re: Fluid Storage containers
|
Thu Sep 22, 2011 12:25 pm |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Fluid Storage containers
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Thu Sep 22, 2011 12:47 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fluid Storage containers
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Thu Sep 22, 2011 12:57 pm |
|
|
rtreads
Official CCB Member
Joined: Sun Jan 02, 2011 9:37 pm Posts: 320
|
Re: Fluid Storage containers
This is what I use. It's big enough to carry more than a quart, but not too big to store. I jam it between the cage and the inner quarter panel. Behind the seat, or in the quarter behind the wheel well.
....ok so I need to learn how to upload photos from my iPhone...
|
Thu Sep 22, 2011 9:42 pm |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Fluid Storage containers
Just saw 1+ gal plastic gas cans at Wal Mart for $6.50 each. Squat, squareish w/ spout.
Just a thought.
Chad
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Sat Sep 24, 2011 1:32 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fluid Storage containers
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Sep 26, 2011 7:53 am |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Fluid Storage containers
In the auto department.
Chad
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Mon Sep 26, 2011 12:02 pm |
|
|
Shawns Fords
Official CCB Member
Joined: Sat Oct 02, 2010 7:36 pm Posts: 779 Images: 0
|
Re: Fluid Storage containers
I wonder how hard it would be to seal the ammo can with something like POR15's floor pan kit? maybe you could eliminate the jug if the can was sealed up and you just filled the ammo cans with the fluids? one for gear, one for engine, one for trans etc etc etc...
I guess it would depend on how your ammo can's lid opens. Need a good seal around the lid of course, but if it is sealed to not leak then you wouldnt need the jug.
|
Mon Sep 26, 2011 11:01 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fluid Storage containers
It's sealed now. I never know I have a leak until I go digging in it. I wouldn't be opposed to filling the cans with the liquids, but they would have to be much smaller than the one I have so as not to take up all the storage room in the bed of the bronco. I'd prefer to use some sort of jug for ease of pouring tho.
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Tue Sep 27, 2011 7:32 am |
|
|
|
|
Page 1 of 1
|
[ 20 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 14 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|