|
It is currently Sun Nov 24, 2024 7:42 pm |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 8 posts ] |
| Previous topic | Next topic |
EFI questions-Fuel pressure guage and regulator
| Author | Message |
|---|---|
|
Official CCB Member  Joined: Fri Dec 24, 2010 1:13 pm Posts: 51 Images: 0 Location: Crested Butte, CO 
|
 EFI questions-Fuel pressure guage and regulatorDoes anyone have a recommendation for a fuel pressure guage and regulator?
Pictures would be helpful too. I am using 1991 Mustang fuel rails. Thank you, Tod _________________ 1966 Bronco - 408 roller cam, Explorer serpentine, NV3550 5spd, hydroboost, 35s, 4.56 gears |
| Tue Feb 28, 2012 9:05 pm |
|
|
|
|
|
Re: EFI questions-Fuel pressure guage and regulator The stock regulator is fine unless you have a unique combination of parts that makes an adjustable one necessary.
I used AN-6 hose so adding a gauge was easy. You do not have the required permissions to view the files attached to this post. |
| Wed Feb 29, 2012 12:41 am |
|
|
|
|
Official CCB Member Joined: Fri Dec 24, 2010 1:13 pm Posts: 51 Images: 0 Location: Crested Butte, CO
|
Re: EFI questions-Fuel pressure guage and regulator I would like the ability to monitor and play with the pressure.
What brand are you using? Can I adapt it to fit on the shraeder valve? I am using the stock rails and fittings. Thank you, Tod _________________ 1966 Bronco - 408 roller cam, Explorer serpentine, NV3550 5spd, hydroboost, 35s, 4.56 gears |
| Wed Feb 29, 2012 4:37 am |
|
|
|
|
|
Re: EFI questions-Fuel pressure guage and regulator Monitoring pressure with a gauge is good. Playing with the pressure may not be so good. Really if the EFI system is working as it should there is no reason to change the pressure.
I have seen gauges that screw to the schrader port. I picked mine up at On-Track. http://www.ontrackperformanceparts.com/ |
| Wed Feb 29, 2012 11:05 am |
|
|
|
|
Official CCB Member Joined: Fri Dec 24, 2010 1:13 pm Posts: 51 Images: 0 Location: Crested Butte, CO
|
Re: EFI questions-Fuel pressure guage and regulator I like the idea of keeping it simple too. I will just get the guage for now.
I love the look of your hoses with AN fittings. I like the idea of a more secure connection too. I will have to learn how to build the hoses, hopefully the tools are not cost prohibitive. _________________ 1966 Bronco - 408 roller cam, Explorer serpentine, NV3550 5spd, hydroboost, 35s, 4.56 gears |
| Wed Feb 29, 2012 11:00 pm |
|
|
|
|
|
Re: EFI questions-Fuel pressure guage and regulator I used a vice, a couple wrenches, and a sharp chisel to cut the hose.
|
| Wed Feb 29, 2012 11:54 pm |
|
|
|
|
Official CCB Member Joined: Fri Dec 24, 2010 1:13 pm Posts: 51 Images: 0 Location: Crested Butte, CO
|
Re: EFI questions-Fuel pressure guage and regulator _________________ 1966 Bronco - 408 roller cam, Explorer serpentine, NV3550 5spd, hydroboost, 35s, 4.56 gears |
| Thu Mar 01, 2012 5:08 am |
|
|
|
|
Official CCB Member  Joined: Wed Nov 16, 2011 8:17 pm Posts: 49
|
Re: EFI questions-Fuel pressure guage and regulator I also used the stock regulator and picked my pressure gauge up at On-Track.
_________________ '77 - efi, 302, detroit 9"rear w/4.56, D44 (locked), 35" M/TR's, Roll Cage |
| Thu Mar 01, 2012 12:08 pm |
|
|
|
|
|
Page 1 of 1 |
[ 8 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 21 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |