|
|
Register •
FAQ
• Login
|
|
|
It is currently Sat Nov 23, 2024 1:26 pm
|
|
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
TOOLMAN
Official CCB Member
Joined: Mon Feb 14, 2011 10:29 am
Posts: 768
Location: The MHC
|
 EFI Spark Plug Gap I finished up my EFI conversion and while EFIGuy was tuning my motor, he mentioned I should probably replace the plugs. So, here's the question: Do I gap the new plugs based on the original 302 (.028-.032) because I'm running a mid-70s long block, or to an Explorer 5.0 (.054). My guess would be .054 because I'm running the coil packs. Is this a correct assumption? Just thought I would run it by some more knowledgeable people before I install them. There's quite a big discrepancy there!
_________________
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
|
| Tue May 26, 2015 12:36 pm |
|
|
|
sykanr0ng
Official CCB Member
Joined: Thu Jan 22, 2015 1:46 am
Posts: 405
Location: Greeley, CO
|
Re: EFI Spark Plug Gap Modern ignition = modern sparkplug gap.
Those coil packs are putting out the same energy in your Bronco as they were in the Explorer.
_________________
"You say overkill like it's a bad thing."
|
| Tue May 26, 2015 12:54 pm |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: EFI Spark Plug Gap You want to run as much as possible before you get spark blow out.
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Tue May 26, 2015 8:00 pm |
|
|
|
TOOLMAN
Official CCB Member
Joined: Mon Feb 14, 2011 10:29 am
Posts: 768
Location: The MHC
|
Re: EFI Spark Plug Gap So, for the record, I did .054 and it seems to work just fine. I had a tiny miss and this seemed to cure it. The old plugs were about a year old and looked pretty good, but were gapped at probably .032-.035. Note: I'm using stock Motorcraft coil packs.
_________________
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
|
| Wed May 27, 2015 7:07 am |
|
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Who is online |
Users browsing this forum: Google [Bot] and 4 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
