BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

A place to coordinate Meet and Greets, Trail Runs, BBQs, etc. Please move your event to the Trip Reports forum once complete, or as a Moderator to do so.

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby hockeydad4-22 » Sat Jun 18, 2011 3:55 pm

Chad - great job, she sure is pretty.

Justin - same complement to you and your daughter. Awesome onesie! Better teach big brothers to keep the boys at bay when she hits teenage years. Or just teach her to kick some twerps ass when needed. Oh and great job on the cars.

Dan + Justin - the comments from the peanut gallery were awesome when you guys were on the cars. Comments of "He wins the prize for taking the nicest truck up there" and "I am a Yota guy but these broncos are making me rethink that" were seriously the norm. The best was the lifted, "built" blazer that got shamed by two awesome rigs that rolled right up and ran the course. Great job guys.

Great time and when I get a chance I will post my pictures of the two of you playing were most others feared to tread.
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
 
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm
Location: Highlands Ranch Colorado

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Entourage » Sat Jun 18, 2011 5:02 pm

Breakfast was fun as always. Great to see everyone. Love that my part bin was almost gone and thanks to Gregg for grabbing the dash parts up in Fort Collins. Great to Shane and see his straight Bronco.

I am not sure anyone bought there own Breakfast today - everyone owed someone a favor while others lost a bet. Dan lost a bet to MyLittlePony that I would be at the Breakfast. Wesley Snipes said "Always bet on Chad" or something like that.

Thanks to everyone keeping me motivated. A big thank you to ZOSO for helping me out multiple times over the last few weeks, staying till late last night bleedin' brakes, and following me to breakfast on it's inaugural trip. Big thanks to Viper - Wouldn't have drove it without his stamp of approval.

Looks like I missed a lot of fun at 4WP after breakfast. I was worried about heading down since I was unable to get my truck registered. That didn't stop me from taking the family to Lunch on our first family ride.

Kick ass club and appreciate all of the compliments. The club Bronco events are fun, but I have to admid that they are funner with a Bronco to drive. smokin
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
User avatar
Entourage
Official CCB Member
Official CCB Member
 
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm
Location: Gilbert, Arizona

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby ZOSO » Sat Jun 18, 2011 5:48 pm

Congrats Chad! So glad to see it driving down the road. Been a long time coming. You did a great job. Im just happy you let me help ya out. If you need any help finishing the wire harness let me know.
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
User avatar
ZOSO
Moderator
Moderator
 
Posts: 3907
Joined: Mon Nov 15, 2010 4:58 pm
Location: Henderson, Co

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Rox Crusher » Sat Jun 18, 2011 5:59 pm

chad - congratulations on getting that bad boy to the breakfast.

a few more little things to finish and you will be out wheelin with the rest of us.

Thank you for swapping me the tow bar for the air cleaner (which I will get to you later this week)
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
 
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm
Location: Roxborough Park, Colorado

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Booger » Sat Jun 18, 2011 6:06 pm

Another great breakfast. Congrats Chad on the fine work. That thing is a very sweet ride. 4WP was a kick as well. Great to see a couple Broncos show that Blazer how to do it.

I am working on another couple of Booger film productions so stay tuned.

A teaser
http://www.youtube.com/watch?v=1yOlH9Jx ... fs&index=5
Last edited by Booger on Sat Jun 18, 2011 7:51 pm, edited 2 times in total.
Bob - Turning hydrocarbons into noise since 1970

Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
User avatar
Booger
Official CCB Member
Official CCB Member
 
Posts: 809
Joined: Thu Dec 23, 2010 5:55 pm
Location: Broomfield

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby socofn » Sat Jun 18, 2011 7:05 pm

YOU GUYS ROCK!!!!!!!!!!!!!!!!!!!!!!!!!!! JP
74, MONEY EATER
socofn
Official CCB Member
Official CCB Member
 
Posts: 204
Images: 0
Joined: Sat Apr 02, 2011 10:52 am
Location: Pueblo County

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby MySweetPony » Sat Jun 18, 2011 8:22 pm

booger.....teaser is funny as hell....keep up the vids. LOVE EM!!!!!
Chad, its mysweetpony....dont make me "crawl" over you with my pizza cutters for calling my rig "little" spank
User avatar
MySweetPony
Official CCB Member
Official CCB Member
 
Posts: 21
Joined: Sun Oct 10, 2010 5:35 pm
Location: Westminster, CO

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Entourage » Sat Jun 18, 2011 8:43 pm

MySweetPony wrote:Chad, its mysweetpony....dont make me "crawl" over you with my pizza cutters for calling my rig "little" spank


Sorry about that - if you would post more then I would get it right laughing2 poke
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
User avatar
Entourage
Official CCB Member
Official CCB Member
 
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm
Location: Gilbert, Arizona

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby cobshane » Sat Jun 18, 2011 10:10 pm

First breakfast I was able to make it too, and definitely not the last. What a great crowd to hang out with. There was many great Bronco's to drool over! Chads Bronco was impeccable, down right amazing looking! Thanks for the lug nuts in the freebie pile. They will be needed once I get 8 lug front setup done. Justin's bronco definitely has great capability, awesome truck!
What a fun time. I have hung out with some hot rod crowds before and alot of the people were pretty snotty, or stuck up. Not here though, everyone is laid back and not trying to prove anything. Everyone helps everyone else. That's what's it's about! thanks all.
User avatar
cobshane
Official CCB Member
Official CCB Member
 
Posts: 516
Images: 1
Joined: Fri Nov 12, 2010 11:31 pm
Location: littleton

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Justin » Sat Jun 18, 2011 10:14 pm

Guys (and gals), today was awesome. Many thanks to everyone. Breakfast with friends, driving over cars, a trip to the junkyard, new parts, couldn't have been better. Booger, that video is hilarious, looking forward to the full length version. Dan, thanks for spotting me on the cars!
User avatar
Justin
Official CCB Member
Official CCB Member
 
Posts: 6198
Images: 0
Joined: Sat Oct 09, 2010 11:04 pm
Location: Lakewood

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby akaFrankCastle » Sat Jun 18, 2011 10:19 pm

Looks like a great time guys! Just wish I could have made it. Dan, truly impressive in an UNCUT Bronco. And Justin, climbing that stack and wheeling with no power steering... Both of you guys, truly represent the capabilities these 40 year old trucks have.

So what's the story with the K5 too chicken to climb the pile or couldn't make it up?
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
 
Posts: 4901
Images: 0
Joined: Wed Oct 27, 2010 5:25 pm
Location: Colorado Springs

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby cobshane » Sat Jun 18, 2011 10:40 pm

akaFrankCastle wrote:Looks like a great time guys! Just wish I could have made it. Dan, truly impressive in an UNCUT Bronco. And Justin, climbing that stack and wheeling with no power steering... Both of you guys, truly represent the capabilities these 40 year old trucks have.

So what's the story with the K5 too chicken to climb the pile or couldn't make it up?


No locking capability and lack of flex I guess shrug . The chicken part might have played a role as well.
User avatar
cobshane
Official CCB Member
Official CCB Member
 
Posts: 516
Images: 1
Joined: Fri Nov 12, 2010 11:31 pm
Location: littleton

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Booger » Sun Jun 19, 2011 5:08 am

coberlyshane wrote:No locking capability and lack of flex I guess shrug . The chicken part might have played a role as well.


Not picking on the Blazer but I think part of it was lack of flex, part open diffs, and the other part center of gravity. I don't think open diffs play into it much because zillacon and the Jeep weren't locked either.
Bob - Turning hydrocarbons into noise since 1970

Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
User avatar
Booger
Official CCB Member
Official CCB Member
 
Posts: 809
Joined: Thu Dec 23, 2010 5:55 pm
Location: Broomfield

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Moab Mike » Sun Jun 19, 2011 2:25 pm

Here is where I was at during the BWB. I did think about driving my Bronco up here!
You do not have the required permissions to view the files attached to this post.
User avatar
Moab Mike
Official CCB Member
Official CCB Member
 
Posts: 1940
Joined: Mon Jan 03, 2011 1:59 pm
Location: Witness Protection Program

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Zenzone » Sun Jun 19, 2011 8:46 pm

Congrats Chad on Finishing the Bronco. I cant wait to see it. Looks like I missed a great Breakfast!! Thats so cool driving up on the cars in the Broncos. Justin your going to be a master driver in the that bronco in no time with all this offroad you are doing. Zillacon love how capable Ketchup is, cant imagine how many people you impressed in your Sleeper. Ever since I heard that train horn on your truck I cant stop thinking about getting my own version.
1976 Ranger Ford Bronco, 33's, 4 inch lift, Holly truck avenger 4 barrel 302, Sidewinder winch, on board air, amplified sound system, duel battery, CB radio,

Real Estate Agent at Lorin Properties Inc.
Zen@LorinProperties.com (303) 653-1541
User avatar
Zenzone
Official CCB Member
Official CCB Member
 
Posts: 304
Images: 0
Joined: Mon Oct 11, 2010 8:34 pm
Location: Arvada

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby PonyCorral » Mon Jun 20, 2011 9:13 am

Nice work to everyone, Chad, Justin, Dan all of you who have spent many hours working on your trucks and many more hours organizing breakfasts and maintaing the website! One of these days I will make it to a Breakfast.
74 Ranger
65 Fastback
User avatar
PonyCorral
Official CCB Member
Official CCB Member
 
Posts: 297
Images: 0
Joined: Fri Dec 17, 2010 1:42 pm
Location: Arvada

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby offroad » Mon Jun 20, 2011 11:29 am

Hey all, this is Brian with the Bronco'd Ranger.

This was my first trip to a BWB, and it was AWSOME! 4 Wheel Parts was a ton of fun too! Way to show up the Chev ;)

Way too cool to see so many awsome Bronco's together in one place. A great group of people to be around too! I had a blast.

Thank you all for havin me along, Even tho I have a wannabe Bronco haha. The Ranger is great and its truely a Bronco at heart (all the specs are in my sig) but I'd really like to get a Classic Bronco one day. With the Ranger only having 2 seats I can't take the Wife and my Daughter out at the same time. I wonder if anybody sellin one on craiglist would be willin to trade? Just a thought. The EB Bug bit me looong ago when I was a kid and my parents had a 70-some Classic Bronco, Orange with white fenders/top. I've wanted one ever since.

Anybody think we could get a Bronco body to fit on a Ranger frame to complete its transformation? HAH. Stepping down to a 92" wheelbase from 125" would be rather difficult I imagine.

Just a couple pics I grabbed:
At breakfast:
Image

Zillacon on the cars at 4 wheel parts:
Image

And the Ranger posin at BWB:
Image
'93 Ranger - Classic Bronco at heart - Cammed 5.0, Cobra topend, AOD w/ Shift kit. D20 w/ Twin Sticks. D44 Bronco front, 4:56's, Trac-lok, Chevy disks. '66 Bronco 9", 4:56's, Lock-right. 3.5" JD coils. 8" total lift on 35" MTR Kevlars
User avatar
offroad
 
Posts: 9
Joined: Sat Jun 18, 2011 5:55 pm
Location: Aurora

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Booger » Tue Jun 21, 2011 3:34 am

Check out this video of zillacon and the cars. Hope you enjoy
http://www.youtube.com/profile?user=b1bendt#p/u
Bob - Turning hydrocarbons into noise since 1970

Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
User avatar
Booger
Official CCB Member
Official CCB Member
 
Posts: 809
Joined: Thu Dec 23, 2010 5:55 pm
Location: Broomfield

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby akaFrankCastle » Tue Jun 21, 2011 6:20 am

Thanks for the laugh this morning Boog! Great airport viewing material for sure.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
 
Posts: 4901
Images: 0
Joined: Wed Oct 27, 2010 5:25 pm
Location: Colorado Springs

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby Booger » Tue Jun 21, 2011 5:52 pm

akaFrankCastle wrote:Thanks for the laugh this morning Boog! Great airport viewing material for sure.

Goes along with the Ferd F-teenthousand don't it?
Bob - Turning hydrocarbons into noise since 1970

Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
User avatar
Booger
Official CCB Member
Official CCB Member
 
Posts: 809
Joined: Thu Dec 23, 2010 5:55 pm
Location: Broomfield

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby cobshane » Mon Jun 27, 2011 5:06 pm

Image
Image
User avatar
cobshane
Official CCB Member
Official CCB Member
 
Posts: 516
Images: 1
Joined: Fri Nov 12, 2010 11:31 pm
Location: littleton

Re: BWB and 4 Wheel Parts 50th Anniversary Event 6-18-11

Postby cobshane » Mon Jun 27, 2011 5:09 pm

Image
User avatar
cobshane
Official CCB Member
Official CCB Member
 
Posts: 516
Images: 1
Joined: Fri Nov 12, 2010 11:31 pm
Location: littleton


Return to Staging Area

Who is online

Users browsing this forum: No registered users and 8 guests