|
It is currently Sat Nov 23, 2024 1:56 am
|
|
Page 1 of 1
|
[ 6 posts ] |
|
Stock rear tank, evap stuff, 9" disc pts, p/s, misc
Author |
Message |
OldBalls
Joined: Mon Nov 23, 2015 9:29 pm Posts: 16 Location: Conifer
|
Stock rear tank, evap stuff, 9" disc pts, p/s, misc
Doing a light shop clean out. I'll try to update or repost as I dig stuff up. Thought I'd put an ad up so if someone is interested I can prioritize that. Located in Conifer, drive out past DIA once a week or so. Open to ship for cost of postage.
Stock rear tank w/ straps, sender. Lived in a clean rust free bronco in CO since at least the early 90s. Cleaned out and POR15'ed several years ago. Ended up going with an Aero for EFI so never reinstalled. I don't know what if anything these are worth so let's say $40?
Charcoal canister from a 71. Also have all the stuff from behind driver's seat if anyone needs that. FREE
9" disc conversion parts from a 70's car. GONE
3speed floor shift conversion FREE, rusty
Rad overflow bottle '71 FREE
Explorer p/s bottle FREE
Fuel filter (motorcraft) for non SD 7.3 free (don't worry I still have the truck...)
Edit, forgot this one: P/S Cooler Derale 13225 24" Long 2 pass 6AN fittings. $20. New condition, I ended up using a 17"
Last edited by OldBalls on Tue Jun 23, 2020 6:42 pm, edited 3 times in total.
|
Sun Apr 12, 2020 10:23 pm |
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: Stock rear tank, evap stuff, 9" disc parts, misc
I'd be interested in the rear disk stuff if it fits a large bearing rear end.
|
Sun Apr 12, 2020 10:35 pm |
|
|
OldBalls
Joined: Mon Nov 23, 2015 9:29 pm Posts: 16 Location: Conifer
|
Re: Stock rear tank, evap stuff, 9" disc parts, misc
Well that was quick. Should fit a big bearing I believe. Was handed off by a good friend who had a fullsize 9 and went another direction. Let me take a close look at what's there / phone him to confirm, and I'll reach out to you Justin
|
Sun Apr 12, 2020 10:42 pm |
|
|
reallytallman
Joined: Fri Feb 01, 2019 11:13 pm Posts: 22
|
Re: Stock rear tank, evap stuff, 9" disc pts, p/s, misc
I would take the tank, can you text me at 303-718-4651
Sent from my SM-N920V using Tapatalk
|
Mon May 11, 2020 5:39 pm |
|
|
Mitche11
Official CCB Member
Joined: Sat Aug 06, 2011 3:04 pm Posts: 64 Images: 0 Location: Fort Collins, CO
|
Re: Stock rear tank, evap stuff, 9" disc pts, p/s, misc
I want to fill the hole in the body behind the driver’s seat where the evap stuff went. If there’s a rubber seal thingy, or something like that, I’ll take it. Please let me know.
Sent from my iPad using Tapatalk
_________________ 72 Bronco Sport, 5.8 EFI, NV3550
|
Tue May 12, 2020 9:43 pm |
|
|
OldBalls
Joined: Mon Nov 23, 2015 9:29 pm Posts: 16 Location: Conifer
|
Re: Stock rear tank, evap stuff, 9" disc pts, p/s, misc
Sorry guys work got busy and I apparently lost sight of this thread / didn't see reply notices.
I will PM about the tank.
That part of the evap system is still mounted in my truck but it's coming out so if there's a plug in there I may end up needing to keep it. Should get to dealing with that stuff next few weeks so I'll reach out if I have something useful
|
Tue Jun 23, 2020 6:37 pm |
|
|
|
|
Page 1 of 1
|
[ 6 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 4 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|