|
|
Register •
FAQ
• Login
|
|
|
It is currently Sun Nov 24, 2024 3:29 pm
|
|
Page 1 of 1
|
[ 6 posts ] |
|
| Author |
Message |
|
socofn
Official CCB Member
Joined: Sat Apr 02, 2011 11:52 am
Posts: 204
Images: 0
Location: Pueblo County
|
 2150 carb help I need some help. My 74 started dying about 2 minutes after start up. It is getting fuel and seems like it is loading up and flooding. Not sure how to remedy this. I have disconected the electric choke power and this has not helped. Your expert assistance is needed. The bronco has a motorcraft 2150 which i rebuilt 2 months ago. Thanks JP
_________________
74, MONEY EATER
|
| Sat May 21, 2011 10:10 pm |
|
|
|
Moab Mike
Official CCB Member
Joined: Mon Jan 03, 2011 2:59 pm
Posts: 1940
Location: Witness Protection Program
|
Re: 2150 carb help
|
| Sun May 22, 2011 2:30 am |
|
|
|
Booger
Official CCB Member
Joined: Thu Dec 23, 2010 6:55 pm
Posts: 809
Location: Broomfield
|
Re: 2150 carb help Disconnecting the power to the electric choke will only delay the choke from coming off. You might be seeing the choke set too tight. Try loosening the 3 screws holding the black choke housing and rotate the housing a little in the lean direction. The electric part aids in choke pull off by heating a bimetal spring. Could be that it doesn't have power to pull it off or the bimetal spring has fatigued and no longer working.
My dad removed the choke from the 2150 on my Bronco years before I owned it and never had an issue. Cold blooded and took some throttle feathering for a bit in the morning but always started.
_________________
Bob - Turning hydrocarbons into noise since 1970
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
|
| Sun May 22, 2011 6:43 am |
|
|
|
socofn
Official CCB Member
Joined: Sat Apr 02, 2011 11:52 am
Posts: 204
Images: 0
Location: Pueblo County
|
Re: 2150 carb help Thanks. I will give it a try when I get home. JP
_________________
74, MONEY EATER
|
| Sun May 22, 2011 9:56 am |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: 2150 carb help Try both of those. To rule out the choke right away is get some tie wire and wire it open. If its cold you'll have to feather the gas to get it to run for a bit. Good luck.
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Sun May 22, 2011 11:08 am |
|
|
|
socofn
Official CCB Member
Joined: Sat Apr 02, 2011 11:52 am
Posts: 204
Images: 0
Location: Pueblo County
|
Re: 2150 carb help Best i could figure it was a kinked fuel hose  . I did replace a bunch of the rubber hose. I got real good at taking the carb off. I ordered a new electric choke from advanced and stuff to do a petronix and new wires. Thanks to all for the help. JP
_________________
74, MONEY EATER
|
| Wed May 25, 2011 8:44 pm |
|
|
|
|
|
Page 1 of 1
|
[ 6 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 24 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
