|
It is currently Sun Nov 24, 2024 3:30 pm |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 6 posts ] |
| Previous topic | Next topic |
Leaf Spring Centering Bolts
| Author | Message |
|---|---|
|
Official CCB Member   Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California 
|
 Leaf Spring Centering BoltsWhere can you get them locally? Not at a local auto parts store. Haven't tried napa yet, but they aren't real local for me. Trying to combine two different leaf packs and the spare bolts I have are too big to fit one set.
J.D. _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Mon May 09, 2011 2:58 pm |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Leaf Spring Centering Bolts Ok, did find some at Napa. Was hoping for closer, but beggars can't be choosers.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Mon May 09, 2011 3:02 pm |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Leaf Spring Centering Bolts I figured drivetrain would as well, but they are further than Napa. Going to try to get to Napa tonight before they close.
J.D. _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Mon May 09, 2011 5:15 pm |
|
|
|
|
Official CCB Member  Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: Leaf Spring Centering Bolts rocky mountain spring 719-528-8418 they have anything spring related and will bend up u-bolts of any size for ya in about 5mins while you wait, and they have plenty of center pins in stock
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's |
| Mon May 09, 2011 7:07 pm |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Leaf Spring Centering Bolts Finally got a descent picture of my bronco after the new leaf springs. Wow, didn't realize how much the others were sagging!
Before:  After:  J.D. _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Wed Jun 01, 2011 3:44 pm |
|
|
|
|
Official CCB Member Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: Leaf Spring Centering Bolts looks great man, and ya it was sagging really bad, i remember when ya drove past me at the last springs breakfast, it was def. draggin' tail
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's |
| Fri Jun 03, 2011 8:48 pm |
|
|
|
|
|
Page 1 of 1 |
[ 6 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 27 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |