|
It is currently Mon Nov 25, 2024 6:43 am
|
Bronco Build is gonna be longer now....
Author |
Message |
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Bronco Build is gonna be longer now....
Turbo surge (from what I undestand) sounds like a pressure cooker: http://www.youtube.com/watch?v=evGFfuhUaRMWhen did the sound happen, when you were hard on the throttle or when you let off or...? I don't think I have ever seen an intercooler boot burp and re-seal. Generally they blow off and you get lots of black smoke from unburned fuel and lose power. But it might not hurt to tighten your boots down a little to see if they are the least bit lose. J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Aug 29, 2011 7:31 am |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Bronco Build is gonna be longer now....
Was into it pretty good. I went through all the intocooler tubes and snugged them up. Also found the boost line about apart. Didn't notice anything outta the norm. Tranny was running around 190 with max of 200.
I just did a fuel filter last week.
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Mon Aug 29, 2011 7:41 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Bronco Build is gonna be longer now....
I use Racor fuel filters. I also extended my drain line so it doesn't pour down the side of the block. I'd like to talk to the designer who thought that was a good idea...
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Aug 29, 2011 7:50 am |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Bronco Build is gonna be longer now....
I stuck. A napa one in for now. Bought a motorcraft for it but need to find a factory lid. The napa is a one piece.
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Mon Aug 29, 2011 7:59 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Bronco Build is gonna be longer now....
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Aug 29, 2011 8:49 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Bronco Build is gonna be longer now....
oh, like there is no air in there to push thru the engine so all it's spinning freely and wildly in a vacuum...I see what you mean now.
I have a WW in mine. Thought I had surge, but I never did. Still have *that* issue, but I think it's related to the serpentine setup. Going after that next.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Aug 29, 2011 9:25 am |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Bronco Build is gonna be longer now....
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Wed Sep 14, 2011 6:58 pm |
|
|
Booger
Official CCB Member
Joined: Thu Dec 23, 2010 6:55 pm Posts: 809 Location: Broomfield
|
Re: Bronco Build is gonna be longer now....
The new tow rig.
You do not have the required permissions to view the files attached to this post.
_________________ Bob - Turning hydrocarbons into noise since 1970
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
|
Wed Sep 14, 2011 7:58 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Bronco Build is gonna be longer now....
Dang that's sharp. That the same V6 in the 'stangs? Drove a rental a while back. At first I wasn't inpressed, but my boss was the one driving. Then I got to drive and was in a bit of a hurry and WOW, I was also amazed! Be interesting to see what it does with a load.
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Wed Sep 14, 2011 8:18 pm |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Bronco Build is gonna be longer now....
No the ecoboost is not in the mustangs yet. This is a twin turbo direct injected 3.5l v6. Crankin out 360+ hp and 420ftlb. Torque comes in around 1500-1700 and holds it till 5500. It will blow the tires off right off the line. He special ordered it with 4.10 gears. We'll see how well it tows his camper as soon as it gets to 1000 miles. Not recommended to tow before then. Might be running to cabelas in GJ next weekend for a quick highway trip.
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Wed Sep 14, 2011 8:35 pm |
|
|
Colorado75bronc
Official CCB Member
Joined: Fri Oct 22, 2010 7:13 pm Posts: 996
|
Re: Bronco Build is gonna be longer now....
not the same motor as the stang, but its the same as the taurus SHO, and ya they run good, not much turbo lag either
_________________ 75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
|
Wed Sep 14, 2011 8:36 pm |
|
|
Booger
Official CCB Member
Joined: Thu Dec 23, 2010 6:55 pm Posts: 809 Location: Broomfield
|
Re: Bronco Build is gonna be longer now....
_________________ Bob - Turning hydrocarbons into noise since 1970
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
|
Thu Sep 15, 2011 4:00 am |
|
|
TIM
Official CCB Member
Joined: Sun Nov 07, 2010 9:54 pm Posts: 41 Location: Denver
|
Re: Bronco Build is gonna be longer now....
I've put about 100,000 miles of my 99.5 superduty's 220,000 trouble free miles all with the same afe stage II cleaned every few thousand miles and the #1 thing I would recommend is an bypass oil filter. I've ran one since 2006 with amsoil on most changes and the oil doesn't even turn black for at least 5k miles.. Oil quality is concern on the huei injector, not a concern to a lot of people but one to me when a new set of injectors can make a few house payments.
|
Fri Sep 16, 2011 3:45 pm |
|
|
777mechanic
Official CCB Member
Joined: Sat Oct 23, 2010 9:00 pm Posts: 252
|
Re: Bronco Build is gonna be longer now....
i've had an afe3 on 4 diesels also and never had any problems . number no#1 is clean fuel and clean oil . i've always changed trans fluid at 15k on all my powerstrokes . problem your having is turbo surge , it happens when you have a 3" inlet and a 4" exhaust . ats sells a housing which will take care of the problem . what horsepower did you bump the motor . on of the best things i've ever done was a turbo bypass , it makes the computer see 22 psi so no backing down of fuel.
|
Fri Sep 16, 2011 7:37 pm |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Bronco Build is gonna be longer now....
No tune or hp bump. Only seeing max of 18# think this winter im gonna do a wicked wheel.
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Fri Sep 16, 2011 8:27 pm |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Bronco Build is gonna be longer now....
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Sun Sep 25, 2011 6:18 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Bronco Build is gonna be longer now....
Those are some cool pictures!
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Sep 26, 2011 7:35 am |
|
|
|
Who is online |
Users browsing this forum: No registered users and 86 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|