|
|
It is currently Mon Nov 25, 2024 1:45 am
|
Rox Crusher's frame off refresh and 5.0 EFI swap
| Author |
Message |
|
airbur
Official CCB Member
Joined: Wed Sep 29, 2010 8:39 am
Posts: 1721
Images: 0
Location: Castle Pines, CO
|
 Re: Rox Crusher's frame off refresh and 5.0 EFI swap While the top piece in mine has no rust, I know the lower sheet metal is rusted out. I think the mount for the clutch is on rusted metal and I know it's just going to blow right through there one of these days.
Is there a "fix" for this area of the bronco so that no water can get down in there? I haven't researched yet.
You're doing FINE by the way! Looks better than it did I'm sure.
_________________
Sold: 1970 w/427W Injected Stroker
|
| Sun Feb 12, 2012 6:37 pm |
|
|
|
ClayJ
Official CCB Member
Joined: Fri Oct 01, 2010 8:45 am
Posts: 521
Images: 0
Location: Colorado Springs
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap Is welding like knott tying?
If you can't tie a good knott, tie allot of em
If you can't make a good weld, layer allot of em?
|
| Mon Feb 13, 2012 12:40 pm |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Mon Feb 13, 2012 2:18 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap I know what you mean. As I work on my truck, I keep finding shoddy repairs I wish I could blame on a PO.
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Mon Feb 13, 2012 6:24 pm |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap I finished up the cowl repairs and cleaning up the engine bay.
Gonna drill the holes in the firewall for the RJM wiring harness and the BC Broncos/Vintage Air A/C I will be installing someday down the road.
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Thu Feb 23, 2012 7:51 am |
|
|
|
airbur
Official CCB Member
Joined: Wed Sep 29, 2010 8:39 am
Posts: 1721
Images: 0
Location: Castle Pines, CO
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap Nice progress! Where are the pics?
_________________
Sold: 1970 w/427W Injected Stroker
|
| Thu Feb 23, 2012 7:57 am |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
You do not have the required permissions to view the files attached to this post.
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Fri Feb 24, 2012 9:53 pm |
|
|
|
Moab Mike
Official CCB Member
Joined: Mon Jan 03, 2011 2:59 pm
Posts: 1940
Location: Witness Protection Program
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap Nice work Rox!!!
|
| Fri Feb 24, 2012 9:56 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap You'll make more progress if you take the body off the wall. That said, lookin' good! I wish I was getting welding done on mine.
|
| Fri Feb 24, 2012 9:56 pm |
|
|
|
Moab Mike
Official CCB Member
Joined: Mon Jan 03, 2011 2:59 pm
Posts: 1940
Location: Witness Protection Program
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
|
| Fri Feb 24, 2012 10:05 pm |
|
|
|
rdanford
Official CCB Member
Joined: Wed Sep 29, 2010 8:12 pm
Posts: 169
Location: Windsor
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap Looks great Rox...how many hours do you have in the patch repair, this needs to be addressed on mine too.
_________________
Royce
1977 Bronco...EFI, ViperBuilt C4, PS, PB, cut with 33's - Rebuild coming
1987 Porsche 951...LS1 swap - SOLD
2006 4Runner V8 Sport Edition
1998 4Runner...DD with 333k and counting
|
| Sat Feb 25, 2012 8:04 am |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Sat Feb 25, 2012 8:15 am |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Sat Feb 25, 2012 8:19 am |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Sat Feb 25, 2012 8:48 am |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap 15k for body work? Your  g crack. Or is that the BH price?
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Sat Feb 25, 2012 3:33 pm |
|
|
|
plumbdoctor
Official CCB Member
Joined: Tue Oct 05, 2010 10:17 pm
Posts: 568
Images: 0
Location: Golden
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap 15k is probably light for for that prick, then try to charge another 15k for mig wire he's nothin' but a dick eater
_________________
Your sh!* is my bread and butter!
|
| Sat Feb 25, 2012 5:59 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Sat Feb 25, 2012 6:05 pm |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap Thanks to Mike and Shawn for helping me pull the 4R70W out of an Explorer today !
We had to wait our turn to get at at it as it was the only 5.0 Explorer in the joint.
Pull-n-Pay was packed like a no charge strip club in a college town.
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Sat Feb 25, 2012 6:30 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap Sweet, I'm jealous. You get all those bugs worked out, and take lots of notes, so I have an expert to talk to when it comes around to my turn.
Get 'r' done, Rox!
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Sat Feb 25, 2012 7:00 pm |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Sat Feb 25, 2012 7:22 pm |
|
|
|
airbur
Official CCB Member
Joined: Wed Sep 29, 2010 8:39 am
Posts: 1721
Images: 0
Location: Castle Pines, CO
|
Rox Crusher's frame off refresh and 5.0 EFI swap
_________________
Sold: 1970 w/427W Injected Stroker
|
| Sat Feb 25, 2012 8:47 pm |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Sun Feb 26, 2012 4:15 am |
|
|
|
airbur
Official CCB Member
Joined: Wed Sep 29, 2010 8:39 am
Posts: 1721
Images: 0
Location: Castle Pines, CO
|
Rox Crusher's frame off refresh and 5.0 EFI swap Who are you getting the adapter kit from?
_________________
Sold: 1970 w/427W Injected Stroker
|
| Sun Feb 26, 2012 6:43 am |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Sun Feb 26, 2012 7:56 am |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap Saturday: welded up a few lingering holes in the firewall and watched Viper tear into the 4R70W
Sunday: seam sealed the engine bay and drank a couple beers while my neighbor painted it
gaining momentum, should have the body back on by Saint Patrick's Day
then floor replacement and final push to finish EFI swap
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Mon Mar 05, 2012 5:37 am |
|
|
|
Moab Mike
Official CCB Member
Joined: Mon Jan 03, 2011 2:59 pm
Posts: 1940
Location: Witness Protection Program
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
You do not have the required permissions to view the files attached to this post.
|
| Mon Mar 05, 2012 6:17 pm |
|
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm
Posts: 3980
Location: Roxborough Park, Colorado
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap paint finished up today
IMG_1101.jpg
You do not have the required permissions to view the files attached to this post.
_________________
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
| Tue Mar 06, 2012 9:52 pm |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap I see a mistake.
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Tue Mar 06, 2012 10:30 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap
|
| Tue Mar 06, 2012 11:19 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: Rox Crusher's frame off refresh and 5.0 EFI swap Nice!
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Tue Mar 06, 2012 11:32 pm |
|
|
|
Who is online |
Users browsing this forum: No registered users and 20 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
