Early Bronco needed

Only Approved Vendors or Admins/Mods can post up in this Section and prices MUST be posted. All other specials need to be posted in the open Vendor section.

Re: Early Bronco needed

Postby Clint » Sat Apr 14, 2012 1:51 pm

Booger wrote:Sent a quick email to you since it's probably too late to get a hold of you on a Friday afternoon.



No way, I was here until LATE last night, and back at it today (but not answering the phone :D)

I got your email, Ill respond this weekend or monday. Feel free to give me a call!
Battlement Fabrication
Grand Jct, CO
970 462 7180
clint@battlementfab.com
Clint
VENDOR
VENDOR
 
Posts: 134
Joined: Wed Jan 05, 2011 6:38 pm
Location: Grand Junction, CO

Re: Early Bronco needed

Postby Clint » Sat Apr 14, 2012 1:53 pm

akaFrankCastle wrote:This is like watching American Bronco Idol here. Except in this case I'm actually excited to see who is picked.



Im glad we are getting everyone worked up about it, Its pretty exciting for us as well! have a ton of folks all over this, and I will be taking care of everyone of them in some sort of way when this is all over, will announce what we are going to do after we pick the EB we will work on.
Battlement Fabrication
Grand Jct, CO
970 462 7180
clint@battlementfab.com
Clint
VENDOR
VENDOR
 
Posts: 134
Joined: Wed Jan 05, 2011 6:38 pm
Location: Grand Junction, CO

Re: Early Bronco needed

Postby ZOSO » Mon Apr 16, 2012 4:29 pm

so who's the lucky one?
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
User avatar
ZOSO
Moderator
Moderator
 
Posts: 3907
Joined: Mon Nov 15, 2010 4:58 pm
Location: Henderson, Co

Re: Early Bronco needed

Postby Clint » Mon Apr 16, 2012 4:49 pm

ZOSO wrote:so who's the lucky one?



Havent made a decision yet :D
Battlement Fabrication
Grand Jct, CO
970 462 7180
clint@battlementfab.com
Clint
VENDOR
VENDOR
 
Posts: 134
Joined: Wed Jan 05, 2011 6:38 pm
Location: Grand Junction, CO

Re: Early Bronco needed

Postby Booger » Mon Apr 16, 2012 6:40 pm

Good place to be in to have so many fine specimens to chose from.
Bob - Turning hydrocarbons into noise since 1970

Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
User avatar
Booger
Official CCB Member
Official CCB Member
 
Posts: 809
Joined: Thu Dec 23, 2010 5:55 pm
Location: Broomfield

Re: Early Bronco needed

Postby Clint » Tue Apr 17, 2012 7:34 am

Booger wrote:Good place to be in to have so many fine specimens to chose from.



gonna be a tough choice for sure. I told everyone I talked to that I had a couple things I needed to finish working out, then I would offer the deal up to someone, if they didnt take it, then I would go down the line.

Its going to be fun!
Battlement Fabrication
Grand Jct, CO
970 462 7180
clint@battlementfab.com
Clint
VENDOR
VENDOR
 
Posts: 134
Joined: Wed Jan 05, 2011 6:38 pm
Location: Grand Junction, CO

Re: Early Bronco needed

Postby ZOSO » Fri May 04, 2012 4:41 pm

so what was decided?
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
User avatar
ZOSO
Moderator
Moderator
 
Posts: 3907
Joined: Mon Nov 15, 2010 4:58 pm
Location: Henderson, Co

Re: Early Bronco needed

Postby Entourage » Wed Jun 06, 2012 10:43 am

Any Update?
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
User avatar
Entourage
Official CCB Member
Official CCB Member
 
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm
Location: Gilbert, Arizona

Re: Early Bronco needed

Postby Aztec77Bronco » Sun Jul 08, 2012 9:10 am

Clint,
I have my '77 EB, almost to the point of pulling the body & suspension is still stock. I'm just south of Dgo, but my folks live in Austin there by Delta & I'm up there all the time, next weekend for my B-day actually (36 & Ma's still crushed if I don't show! LOL) Anyway, As I move forward I'd love to work with you to set up an extreme daily driver. I want to build something with great articulation but can still be drove to Vegas if the mood strikes. I dunno if you know Jeremiah from Proffitts Cruisers, but he started up next door to my folks and so I've got to watch his builds over the years "The Thing" is still my favorite! I'd rather follow the old Slogan A.B.C. (Always Buy Colorado for those who don't remember. LOL) Look me up on the member list & give me a hollar. The frame's in good shape, the body has some cancer, but it's currently unmolested so I won't be swapping out something I've already built. Just some food for thought!
Jarod
'77 Sport, 302 HO on it's way to a resurrection!
'03 Mercedes CLK 320 Cabriolet (W208 body)
'13 Ford F350 Lariat Crew Cab 4wd Power Stroke
User avatar
Aztec77Bronco
Official CCB Member
Official CCB Member
 
Posts: 119
Images: 0
Joined: Thu Jul 05, 2012 10:54 am
Location: Just south of Durango

Previous

Return to CCB Members Only - Vendor Specials

Who is online

Users browsing this forum: No registered users and 0 guests

cron