got 2 31 spline axles that can hit the scrap.

Scrap? Are they bad?

they are near new. They are out of chad's bronco. so the bolt pattern in wrong.

I don't remember, what was he running?

he was running a currie setup. The only reason the axles are just is they are meant for a 5x4.5 bolt pattern. There wasnt enough meet on the flange to drill and press in new studs at the 5x5.5 pattern.

Might be worth posting on CO4x4. One of the jeep guys may be running a 9.

thats true. I'd rather give them to the club.

Thanks! I suspect we'd probably try to sell them for 33x2 money before scrapping them. I don't want no stinking Heep wheels on our club ride.

You could always have some one run em with adapters from 5x4.5 to 5x5.5

What bolt pattern were Mustangs? I wanna build a 56 F100 one of these days and it will likely get a mustang II front sub frame in it.

Mustangs use 5x4.5 and chad did run them with adaptors till one came loose and fubar'd the spacer.

I have a bunch of scrap to bring up. Great incentive to finally get the Bronco up and running.

I might make it by, was already coming up that way anyway. The bronco could use a good highway blast instead of its normal 5 min cruises. Just depends if I get up early enough. Got a rusted out tail gate I've been meaning to junk for a while too.

Resend me the email so I can add the the Johnson family calendar.

Sent, let me know if it doesn't show up.

I going to try and make it. Does anyone have any pics of what they are bringing to sell?

No pics but I was going to list general categories

- drivetrain
- interior
- brakes

I'll add to the list as I pull stuff out

I have a steel wheel with spare tire, rear fiberglass flairs, and a few other small things.

Anyone by chance bringing any radius arms?

Do I have to be a member to attend the swap meet? Do I need to register somewhere? I've got a bunch of crap that I'd like to get rid of (yes, a 3-speed, but I won't bring it!), a pair of axles (dana 30 and for 9, slightly less desireable than a 3 speed!), but some decent stuff - NWP fuel tank, 3.5 in lift springs, etc.

Just show up. No registration and no need to be a member.

Hey tacobronco,

Definitely no registration with this group! What springs for the 3.5" lift? If these are for the rear, I might be interested. With that being said, how long/hard have they been ridden.

As for the jokes that will now follow...keep them coming :)!

Matt

i'll be there.. have some stuff that needs to go and maybe some useful parts. I have some rear axle shafts for a Dana 60 and some other stuff..

Touche....after a joke like that, I may have to come over and take your springs :)!

Happy Birthday and hope you are enjoying the "New Big O"! Super Cool!

Matt