|
It is currently Mon Nov 25, 2024 6:22 am |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 5 posts ] |
| Previous topic | Next topic |
EFI Spring lock connectors
| Author | Message |
|---|---|
|
Official CCB Member   Joined: Mon Feb 20, 2012 10:09 pm Posts: 126 Location: Highlands Ranch 
|
 EFI Spring lock connectorsI got most of the things i need to start running the fuel lines and i noticed that the the fuel pressure regulator sits right on top of the return line connector. how does that work if the fuel comes in and hits all the injectors before getting to the regulator?
Last question for now is how are you EFI guys getting the connector on the return part of the fuel rail with out it hitting the firewall? Right now i can even get the spring lock connector in without fighting the firewall. You do not have the required permissions to view the files attached to this post. |
| Mon Dec 30, 2013 8:34 pm |
|
|
|
|
Official CCB Member  Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: EFI Spring lock connectors The purpose of the fuel pressure regulator is to hold constant fuel pressure in the fuel rail so the injectors always have sufficient supply. Think of a dam with a spillway that let's excess fuel pass by.
I used explorer rails and had to bend one of the fuel rail ends (can't remember which) to make it fit. _________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires. Last edited by Rox Crusher on Mon Dec 30, 2013 8:43 pm, edited 2 times in total. |
| Mon Dec 30, 2013 8:40 pm |
|
|
|
|
Official CCB Member  Joined: Tue May 07, 2013 10:37 pm Posts: 1485
|
Re: EFI Spring lock connectors The regulator works by letting fuel out of the rail when the pressure is too high.
I used different fuel rails but others have bent the tube slightly and some have massaged the firewall. |
| Mon Dec 30, 2013 8:41 pm |
|
|
|
|
Official CCB Member Joined: Mon Feb 20, 2012 10:09 pm Posts: 126 Location: Highlands Ranch
|
Re: EFI Spring lock connectors Great thanks guys!
|
| Mon Dec 30, 2013 9:01 pm |
|
|
|
|
Official CCB Member  Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: EFI Spring lock connectors i had to bend mine as well right by the firewall to clear the upper intake, firewall and wires coming out of the cab. I used a screw driver in the end and did it really really slowly...
_________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish" |
| Tue Dec 31, 2013 12:00 am |
|
|
|
|
|
Page 1 of 1 |
[ 5 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 3 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |