|
|
Register •
FAQ
• Login
|
|
|
It is currently Mon Nov 25, 2024 9:15 am
|
|
Page 1 of 1
|
[ 6 posts ] |
|
| Author |
Message |
|
BNC04
Official CCB Member
Joined: Thu Jan 27, 2011 1:01 pm
Posts: 350
Images: 0
Location: Longmont
|
 ARB fitting leak The fitting is leaking at the Diff. I took the outer nut/fitting off and tried to Teflon tape it to no avail so I think I need to remove the compression sleeve and re-install with a new one. The question I have is,, Can I do this without messing something up and requiring me to remove the diff cover or can I just remove the fitting that goes into the diff and replace the compression sleeve on the support tube and re-assemble?
Thanks
Brett
_________________
75 D44/ARB/Disc PS. 86 5.0 Carbed- NP-435 yukon rear. 4.11 3.5 Susp lift Rampage top
|
| Tue May 13, 2014 10:11 am |
|
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am
Posts: 3942
Location: Denver, Wash Park Area
|
ARB fitting leak You will have to remove the cover as once you take the compression fitting off the metal tube in the diff will probably move away from where the diff/compression fitting was. And it would be a huge headache to get back in the new fitting.
Once you pull the fitting you will see what I mean. Weird it's leaking there as it's just a brass metal on metal fitting. Don't believe there are any o rings at that connection.
_________________
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
| Tue May 13, 2014 12:10 pm |
|
|
|
BNC04
Official CCB Member
Joined: Thu Jan 27, 2011 1:01 pm
Posts: 350
Images: 0
Location: Longmont
|
Re: ARB fitting leak
_________________
75 D44/ARB/Disc PS. 86 5.0 Carbed- NP-435 yukon rear. 4.11 3.5 Susp lift Rampage top
|
| Tue May 13, 2014 1:31 pm |
|
|
|
Kinder
Official CCB Member
Joined: Wed Sep 29, 2010 10:03 pm
Posts: 4371
Images: 0
Location: Parker, CO
|
Re: ARB fitting leak The newer ARBs have an O ring on the copper tubing.
_________________
Best to Date MPG: 26.6
|
| Tue May 13, 2014 2:14 pm |
|
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am
Posts: 3942
Location: Denver, Wash Park Area
|
Re: ARB fitting leak Good to know and I should seeing how I was just in mine. But couldn't remembee
_________________
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
| Tue May 13, 2014 7:00 pm |
|
|
|
horseplay
Official CCB Member
Joined: Mon Jan 21, 2013 8:24 pm
Posts: 408
Location: Grand Junction CO
|
Re: ARB fitting leak You can replace that little O ring with out removing the cover plate. I have done this using a set of forceps just be careful not to crush the tube. It is also important to get the new Oring back in the original position. You will notice a slight compression mark from the original install.
|
| Tue May 13, 2014 7:33 pm |
|
|
|
|
|
Page 1 of 1
|
[ 6 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 8 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
