Rox, you can take glass off the list.

Updated list.

[ ] Carpet
[x] Adjustable trackbar
[x] Grill pieces
[x] Striker posts
[x] PS reservoir
[ ] Gas filler screws
[x] Driver door window tray
[x] 6 screws for window regulator
[x] 4 bolts for window track
[x] Lag bolts for arm rests
[ ] Driver door rod to outside handle
[x] Bump stops
[ ] Bumpers
[ ] Wheels/tires
[x] 4.56 or 4.88 gears
[ ] Soft top
[x] Rebuild 44
[ ] Exhaust
[x] Glass

I fixed my radio hole and made my shift knobs.
20151102_185754.jpg
20151031_184001.jpg
Oh, there's that spare turbo.

Did you/Jeff get the spindle I sent?

I got here long after this project started, but I'd like to jump in and I can lend a hand that week of Thanksgiving. Just let me know when and where.

I'm going to try to be helpful when thanksgiving week rolls around if work doesn't get in the way. Phil, when I brought the Block down I also brought some doors down, were there not rods for the drivers side door locks in there? If not I might have some of the parts from those doors in one of my many boxes of Bronco parts.

where did you get the fuel filler door neck thingy?

20150814_160111.jpg

So what is the full schedule over the next 2 weekends?

We'll get it posted up over the next couple of days.

I think we are going to get a late start this Saturday as Phil might be attending the breakfast.

I have to help a neighbor move and should be home by 10 am or so. We can start anytime after that.

I plan to come over during the week next week as I have taken the week off. Shoot me a PM with your address and let me know when you plan to get going each day.

Thanks!

Ok, we will probably get started a little late today due to road conditions etc

Come on over after the breakfast. Garage will be heated and there will be coffee to help keep warm.

Today's projects will include finishing installation of the D44 front axle and re-gearing the rear axle from 4.11 to 4.88. Plenty to do if you can make it !

We got the front end swapped and built a TRO steering linkage set up.

Had some trouble drilling out the pitman arm so we are on the hunt for a replacement and a place with a real drill press.

We will be back at it today with a 9 am start time.

Probably going to work on re-gearing the rear end and maybe exhaust system.

I'll check my stash for a pitman arm, I'll let you know if I find one and bring it with me this am.

I've got the drill press. If the pitman is anywhere near me I can pick it up, drill it and deliver.

i might have a stock extra pitman arm

Are there any plans to work on it over this weekend? I should have some free time and I have some glass samples I need to bring over for Phil to check as well.

The work never ends.

I'm going to try and make an appearance this weekend if that's the case. You guys wrenching both Saturday and Sunday?

I found out that I'm working Friday now so I'm looking at the weekend as well. Jeff, Message me your address, I had it in my previous phone but it seems to have not transferred to my new one.

We are working today, Friday, Saturday, and Sunday. We generally start between 8 and 9 and wrap it up around dinner time.

Today will be kind of a thrash as we need to finish installation of ARB in the rear, install exhaust, and install twin sticks and fool around with transfer case mount.

Friday, Saturday, and Sunday will be mostly dedicated to body work and getting it primered.

Stop by any time. I really appreciate knowing who is coming and when so we don't mistakenly run off on errands with the joint all locked up.

Thanks to everyone who has already helped this week and looking forward to seeing others over the next few days.